GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.
Home » Public Forums » GMCnet » [GMCnet] Got Double Trouble weighed at a CAT Scale
Re: [GMCnet] Got Double Trouble weighed at a CAT Scale [message #182849 is a reply to message #182683] Sat, 01 September 2012 21:44 Go to previous messageGo to previous message
GMC_LES is currently offline  GMC_LES   United States
Messages: 569
Registered: October 2009
Location: Montreal
Karma:
Senior Member
Ok
I'll try to take some photos this weekend.

Les Burt
Montreal



On 2012-08-31, at 10:40 PM, Bill Bryant <bryant374@earthlink.net> wrote:

>
>
> Re: [GMCnet] Got Double Trouble weighed at a CAT Scale
>
> Fri, 31 August 2012 17:05
>
> Les Burt
>
>
> I have two complete frame assemblies and noticed several differences between them. My original frame is an early 75 unit (9/74) while my spare parts frame is from a 78 coach. The front frame clip is not fabricated the same on these two. The main differences are in where frame gussets and doubler plates have been installed but I also believe that the front frame clip is shaped differently behind the suspension mounting points. I'm wondering if anyone else has noticed these differences? I can photo document the differences if anyone is interested.
>
> Les Burt
> Montreal
>
>
>
>
> I would very much like to see photos that show the differences.
> Bill
> --
> Bill Bryant
> 1976~PB
> 1914 Ford
> 1965 Corvette
> GMC MH History CD
> GMC Showroom Films DVD
> http://bdub.net/billbryant/
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Les Burt Montreal 1975 Eleganza 26ft A work in Progress

Report message to a moderator

[Message index]
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: [GMCnet] Save those old starter solenoids. Or at least save the copper contact washers.
Next Topic: Body Pads
Goto Forum:
  


Current Time: Thu May 16 13:50:41 CDT 2024

Total time taken to generate the page: 0.01064 seconds
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.1.
Copyright ©2001-2021 FUDforum Bulletin Board Software