GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » [GMCnet] Got Double Trouble weighed at a CAT Scale
Re: [GMCnet] Got Double Trouble weighed at a CAT Scale [message #182522 is a reply to message #182405] Thu, 30 August 2012 23:35 Go to previous messageGo to previous message
midlf is currently offline  midlf   United States
Messages: 2212
Registered: July 2007
Location: SE Wisc. (Palmyra)
Karma:
Senior Member
bryant374 wrote on Thu, 30 August 2012 11:26

QUESTION: Do any of you with earlier coaches have a frame WITHOUT the front diagonal brace?




Are you are talking about the two braces that run from the front frame clip rear cross-member (the one the trans bolts to) at the outside ends of that cross-member, to the engine support cross-member (referred to as the suspension cross member) in about 1/3 of the width? If so my early '74 has them.


Steve Southworth
1974 Glacier TZE064V100150 (for workin on)
1975 Transmode TZE365V100394 (parts & spares)
Palmyra WI
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: [GMCnet] Save those old starter solenoids. Or at least save the copper contact washers.
Next Topic: Body Pads
Goto Forum:
  


Current Time: Thu May 16 17:43:20 CDT 2024

Total time taken to generate the page: 0.01426 seconds