GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » [GMCnet] Got Double Trouble weighed at a CAT Scale
Re: [GMCnet] Got Double Trouble weighed at a CAT Scale [message #181803 is a reply to message #181778] Sun, 26 August 2012 02:57 Go to previous messageGo to previous message
Adrien G. is currently offline  Adrien G.   United States
Messages: 474
Registered: May 2008
Location: Burns Flat, OK 73624
Karma:
Senior Member
Rob,

Questions for the GMC Brain Trust:

1) Did GMC actually do anything to the suspension system to up the GAWR and GVWR or just "pencil whip it?"

2) Does my supposition about not having the wheels centered on the scales hold water?

3) Does anyone think there is anything to be gained by weighing the individual axles one by one?

4) Since this is cheap to do I think I'll try it again with both Helen and I in the coach and the wheels as close to the center of
the scales as I can get them when I do the side weights. I don't like the 580 front differential; that delta would drop with both of
us in the seats and it would be what it REALLY is.




On question #3.

The Load-Cell scales in use are calibrated and certified to read the load with negligible percent variation, (in another word, I wouldn't worry about it) at any point (location) on that platform.

Where I work, I have watched the process of scale calibration many times.

FWIW






Adrien & Jenny Genesoto 75 Glenbrook (26-3) Mods LS3.70 FD / Reaction Sys / 80mm Front&Intermidiate / Hydroboost / 16" Tires / Frame Rebuild / Interior Rebuild Yuba City,Ca. Text 530-nine-3-three-3-nine-nine-6
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: [GMCnet] Save those old starter solenoids. Or at least save the copper contact washers.
Next Topic: Body Pads
Goto Forum:
  


Current Time: Thu May 16 08:57:16 CDT 2024

Total time taken to generate the page: 0.01193 seconds