GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » muffler and placement
Re: muffler and placement [message #159632 is a reply to message #159628] Wed, 08 February 2012 12:47 Go to previous messageGo to previous message
PETEinLongBeach is currently offline  PETEinLongBeach   United States
Messages: 90
Registered: June 2007
Location: Long Beach, CA
Karma:
Member
I am also dealing with the eventual replacement of the original mufflers on my coach. Externally they appear quite intact, the running temperatures are about the same on each side, however due to the possibility of internal degradation and resulting backpressure issues, I want to proactively replace them.

Since the coach is very low mileage and original, I want to keep the system in its original configuation and exhaust sound. Which new mufflers would be most compatible with my original system? Should they be welded-in, or can I get away with the original-style clamp assemblies?


Pete Smay
Long Beach, CA
1977 Kingsley
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Exhaust Manifold Gasket Replacement
Next Topic: [GMCnet] Introduction
Goto Forum:
  


Current Time: Tue May 21 04:50:54 CDT 2024

Total time taken to generate the page: 2.57067 seconds