GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » muffler and placement
Re: muffler and placement [message #159608 is a reply to message #159597] Wed, 08 February 2012 05:25 Go to previous messageGo to previous message
mike miller   United States
Messages: 3576
Registered: February 2004
Location: Hillsboro, Oregon
Karma:
Senior Member
gbarrow wrote on Tue, 07 February 2012 19:51

... Call Miguel at MGM-GMC 909-229-7508.
His muffler shop installs a single, flat, rectangular, 2 in 1 out muffler aft of the cock pit and continues with 3" pipe out the end. He has done many ...


I am fairly certain that the muffler you are talking about is a SpinTech muffler <http://www.spintechmufflers.com/> The model would be one of the ones listed below. One advantage over other methods would be NO "Y" pipe. (less cost)

Quote:

Truck/RV Muffler 8347
Inlet Size: 2 1/2 Inch Dual
Outlet Size: 3 Inch Center
Case Size: 4 x 10 1/2 x 20

Truck/RV Muffler 8247
Inlet Size: 2 1/4 Inch Dual
Outlet Size: 3 Inch Center
Case Size: 4 x 10 1/2 x 20


I have one (never installed) that is 3 inch in and out that fits very nicely in the rear area of coaches without separate black/gray tanks. <http://www.gmcmhphotos.com/photos/showphoto.php?photo=8308>

I am fairly certain it is a "8445." (Some day I might even install it into something! Twisted Evil )

Quote:

Truck/RV Muffler 8445

Inlet Size: 3" Side
Outlet Size: 3" Side Inline
Case Size: 4 x 10 1/2 x 20


Mike Miller -- Hillsboro, OR -- on the Black list
(#2)`78 23' Birchaven Rear Bath -- (#3)`77 23' Birchaven Side Bath
More Sidekicks than GMC's and a late model Malibu called 'Boo' http://m000035.blogspot.com
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Exhaust Manifold Gasket Replacement
Next Topic: [GMCnet] Introduction
Goto Forum:
  


Current Time: Tue May 21 14:18:47 CDT 2024

Total time taken to generate the page: 5.75625 seconds