Broken level valve mounting bolt. [message #157698] |
Sun, 22 January 2012 23:34 |
Donovan-formerly Jase386
Messages: 139 Registered: January 2009 Location: Greenville SC
Karma:
|
Senior Member |
|
|
Passenger side removal of height level control valve did not end well. i thought the nut was loose becuase it didnt give any resistance when i turned it, then the damned bolt wrang off with the 2nd twist.
Anyway now that the background is out of the way... how in the world do i get to the bolt from the inside of the coach so i can replace it. its the passenger side which is behind the cabinet under the fridge. but it doesnt look removeable like the panel in the buzz box.
ALL ADVICE WILL BE HEEDED, APPRECIATED AND USED! thanks in advance guys, hoping i can get this project done this week sometime.
Donovan, Greenville SC
1975 Eleganza II
81,500 miles
|
|
|