GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Installing Grease Zerks For Front Wheel Bearings
Re: Installing Grease Zerks For Front Wheel Bearings [message #124278 is a reply to message #124224] Mon, 02 May 2011 17:22 Go to previous messageGo to previous message
gmchunter is currently offline  gmchunter   United States
Messages: 222
Registered: March 2008
Location: ORANGE, CA
Karma:
Senior Member
I wouldn't bother unless your changing out the bearings. Even then why do it when the bearings are replaced as they are now good to go for 25k miles? Now if your one of the few that puts 10k miles on motorhome in a year it might be worth it.

I figure it will take me 10 years minimum to put that much mileage on the motorhome and I am not so much worried about the next guy that gets the motorhome.

It makes me think about my grandmother whose advice I like to follow. She said "I never save new linens and towels because I don't want the next woman to enjoy them."

If you put in the zerk then squirt in some new grease you stand the chance of popping out the seal and causing unnecessary problems and possible damage especially if you don't realize it. I was told that the problem wasn't the bearings as much as the seals which wear out and allow dirt to enter into the bearings that causes the most problems.

Then again, you will be supporting the regular vendors which is a good thing.

Michael
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: [GMCnet] More Fun
Next Topic: [GMCnet] Frosty Cool / Dura Cool
Goto Forum:
  


Current Time: Sun Apr 28 04:45:24 CDT 2024

Total time taken to generate the page: 0.01612 seconds