Re: [GMCnet] Trailer Hitch [message #113022 is a reply to message #113020] |
Tue, 25 January 2011 01:02 |
Ken Burton
Messages: 10030 Registered: January 2004 Location: Hebron, Indiana
Karma:
|
Senior Member |
|
|
George Beckman wrote on Tue, 25 January 2011 00:51 |
I have the through the bumper hitch made for our coaches. I must say it fits like a glove. Nice job on the design. Cutting through the bumper was interesting. Not a job for a reciprocating saw. I used a angle grinder with a thin blade and that cut it easily. Tough stuff. If the rear drags, it is not the hitch.
|
I drilled two holes in each bumper half to make the corners round and then cut the bumper on a band saw. The whole cutting job took about 10 minutes. Removing the bumper took longer. I replaced all of the bolts with stainless ones while I had it off.
Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana
|
|
|