GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » [GMCnet] Fan belts replacement, still
Re: [GMCnet] Fan belts replacement, still [message #77191 is a reply to message #77186] Fri, 19 March 2010 05:46 Go to previous messageGo to previous message
Surbo is currently offline  Surbo   United States
Messages: 213
Registered: February 2004
Karma:
Senior Member
Howdy;

There is a tang on the PS mounting bracket that was designed to do the proper belt tightening. Use a 1/8" thick X 1/2" wide and probably about 12" long piece of flat, I use aluminum, look down from the top and you can see where to slip the flat piece into position. One finger will have the leverage to tighten the belt. DO NOT pry on the fluid container, it will distort and put undue pressure on the "O" rings seals and there will probably be a leak.

Bob Drewes in SESD (hovering around the GMCMI rally)
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: HVAC Temperature Valve/Select Valve Operation
Next Topic: [GMCnet] Re; Marker Light Wiring
Goto Forum:
  


Current Time: Mon May 20 11:25:58 CDT 2024

Total time taken to generate the page: 1.15576 seconds