GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.
Home » Public Forums » GMCnet » Re: [GMCnet] EV6010 Stalling
Re: [GMCnet] EV6010 Stalling [message #320997] Mon, 24 July 2017 16:17 Go to previous message
James Hupy is currently offline  James Hupy   United States
Messages: 6806
Registered: May 2010
Karma:
Senior Member
Sounds like it might be a chafed wire or loose or corroded connector, or it
could be a low float level in the carb.
Jim Hupy
Salem, Or
78 GMC ROYALE 403

On Jul 24, 2017 1:46 PM, "Justin Brady" wrote:

My Ev6010 is stalling whenever I take a sharp right turn.
Any ideas?
My first thought is float height, but I'll have to pull it out to check so
I figured I would check and see if you guys have any insights before doing
the work.

It starts right back up afterward.
--
Justin Brady
http://www.thegmcrv.com/
1976 Palm Beach 455

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

Report message to a moderator

[Message index]
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: My 1976 Palm Beach Project
Next Topic: [GMCnet] Onan running runs rough
Goto Forum:
  


Current Time: Sun May 12 10:37:17 CDT 2024

Total time taken to generate the page: 0.00767 seconds
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.1.
Copyright ©2001-2021 FUDforum Bulletin Board Software