GMCforum: GMCnet » [GMCnet] Thorley & Remflex install ?

Home » Public Forums » GMCnet » [GMCnet] Thorley & Remflex install ?

Show: Today's Messages :: Polls :: Message Navigator

[GMCnet] Thorley & Remflex install ? [message #155084]

Mon, 02 January 2012 08:54

Richard Smith

Messages: 14
Registered: February 2004

Karma:

Junior Member

Soon will be installing a set of Thorleys for the first time and using
Remflex gaskets.

Should I use High Temp Sealant on the gaskets??

Plan to use the standard torque of 25 ft lbs on the bolts with 75% on
the center bolt.

Can/Should I use the bolt locks with the Headers??

TIA

Richard 76 Glenbrook
at the Castle in Colorado
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

[Message index]

		[GMCnet] Thorley & Remflex install ? By: Richard Smith on Mon, 02 January 2012 08:54
		Re: [GMCnet] Thorley & Remflex install ? By: Craig Lechowicz on Mon, 02 January 2012 10:35
		Re: [GMCnet] Thorley & Remflex install ? By: jimk on Mon, 02 January 2012 12:17
		Re: [GMCnet] Thorley & Remflex install ? By: Richard Smith on Tue, 03 January 2012 09:08
		Re: [GMCnet] Thorley & Remflex install ? By: Dennis S on Mon, 02 January 2012 12:38
		Re: [GMCnet] Thorley & Remflex install ? By: tdublu on Mon, 02 January 2012 13:05
		Re: [GMCnet] Thorley & Remflex install ? By: jimk on Mon, 02 January 2012 21:44
		Re: [GMCnet] Thorley & Remflex install ? By: tdublu on Tue, 03 January 2012 19:29

Previous Topic:	[GMCnet] Oil Pan Gasket - replacing
Next Topic:	[GMCnet] Gauge Envy

Goto Forum:

-=] Back to Top [=-

Current Time: Sun May 19 21:40:43 CDT 2024

Total time taken to generate the page: 0.31850 seconds