| |
2521 Search Results Found |
| 1 |
Forum: GMCnet «»
Posted on: Fri, 11 September 2020 19:59 «»
By: Bruce Hart
Re: [GMCnet] Bruce Hart
…have the front half left if anyone wants some😀😀😀😀
As Hal and I worked at removing the rear cap, Hal would see something of
interest to him and I would ask for it. The more he takes the less I have
to get rid of.
As it turned out Hal took the rear cap …
|
| 2 |
Forum: GMCnet «»
Posted on: Wed, 09 September 2020 18:00 «»
By: tmaki
Re: [GMCnet] Remove or not remove
…[Somehow I sent the draft to myself, but not the list...sorry for the double post, if so.][
Yes. Just getting over it.
I can't comment on the specific cause, because I don't know for sure. My GMC has had an electric pump for the 21 years I've owned it…
|
| 3 |
Forum: GMCnet «»
Posted on: Wed, 02 September 2020 18:06 «»
By: stu@97381.com, Emery
Re: [GMCnet] I THINK I AM THROWING IN THE TOWEL
…Exactly. Get rid of the mechanical fuel pump. Put a block plate over the opening.
Emery Stora
> On Sep 2, 2020, at 3:59 PM, Marsh Wilkes via Gmclist wrote:
>
> WOW
>
> Why any mechanical pump?
>
> Marsh Wilkes
> …
|
| 4 |
Forum: GMCnet «»
Posted on: Mon, 31 August 2020 17:08 «»
By: Scott Nutter
Re: I THINK I AM THROWING IN THE TOWEL
…don’t know if it has been discussed earlier. But have you considered putting on a bolt on EFI throttle body, with a inline high pressure fuel pump and get rid of the carb and other fuel pumps and lines? Almost start from scratch and eliminate What has not…
|
| 5 |
Forum: GMCnet «»
Posted on: Tue, 25 August 2020 22:39 «»
By: Jerry Wheeler
Re: [GMCnet] 1978 Center Kitchen Royale for Sale
…bought my first GMC in 1997 and attended my first GMC rally in 1998 at
Bean Station. That fall, we attended the GMCMI rally in Marion, NC. There
was almost 400 GMCs at this rally and we enjoyed the open house and loved
the Royales and the woodwork in …
|
| 6 |
Forum: GMCnet «»
Posted on: Sat, 08 August 2020 08:29 «»
By: 6cuda6
Re: I THINK I AM THROWING IN THE TOWEL
…if they plumbed it back to the tank vents instead of the filler neck etc it might cause a problem...my point i guess was more to do with who knows how they set it up so just best to get rid of it.
Rich,
While I agree with your basic premise (…
|
| 7 |
Forum: GMCnet «»
Posted on: Sun, 02 August 2020 14:00 «»
By: James Hupy
Re: [GMCnet] Engine Misfire
…real drill is as follows.
1. Drain the coolant, including the plug on the side of the crankcase
where the knock sensor is.
2. Remove the upper radiator hose and thermostat housing along with all
the heater hoses that attach to the intake manifold.
3…
|
| 8 |
Forum: GMCnet «»
Posted on: Sun, 26 July 2020 18:06 «»
By: GatsbysCruise
Re: I THINK I AM THROWING IN THE TOWEL
…""" Worse case have a couple beer relax then throw a regulator on it (if you have a high pressure electric pump) and bypass the mechanical pump all together (leave it in)1....you just cant give up without a last ditch effort. Beside if it …
|
| 9 |
Forum: GMCnet «»
Posted on: Sun, 26 July 2020 15:37 «»
By: 6cuda6
Re: I THINK I AM THROWING IN THE TOWEL
…case have a couple beer relax then throw a regulator on it (if you have a high pressure electric pump) and bypass the mechanical pump all together (leave it in)1....you just cant give up without a last ditch effort. Beside if it runs and you still want …
|
| 10 |
Forum: GMCnet «»
Posted on: Thu, 16 July 2020 12:58 «»
By: James Hupy
Re: [GMCnet] ONAN generator
…rid of that clear fuel line, and replace it with Gates Barricade Hose
rated for fuel with alcohol in it. Nothing else.
Jim Hupy
Salem, Oregon
On Thu, Jul 16, 2020, 9:18 AM Bob Dunahugh via Gmclist <
gmclist@list.gmcnet.org> wrote:
> I've …
|
| 11 |
Forum: GMCnet «»
Posted on: Mon, 13 July 2020 13:38 «»
By: James Hupy
Re: [GMCnet] Cooked my tranny
…the exception of mechanical internal parts breaking without warning,
most transmission failures are the direct result of internal clutch
slippage. If your coach will not gain speed, even with heavy throttle
application, best practice would be to manually …
|
| 12 |
Forum: GMCnet «»
Posted on: Tue, 07 July 2020 18:45 «»
By: GatsbysCruise
Re: Removing Liquid Applied Roof Coating (and other Roof Questions)
…my old RV I was a believer in that elastometric roof coating.
The old RV originally had that crap aluminum roof coating, it cracked when the RV was moved a foot and then leaked.
The Elasto roof coating sealed all the leaks, and the cloth seam cover …
|
| 13 |
Forum: GMCnet «»
Posted on: Wed, 01 July 2020 18:43 «»
By: Kerry
Re: New build (maybe)
…know your planning on putting a generator up front but I bet there is room for the mini-split beside it. You'd have to protect the coils from road debris but if it's a stretch, you could probably put it on the side. The condenser on the 12000 BTU units …
|
| 14 |
Forum: GMCnet «»
Posted on: Thu, 04 June 2020 09:32 «»
By: Richard RV
Re: [GMCnet] Flooring Thickness of '77 Birchaven?
Stu,
Here's an earlier thread that might be helpful.
http://gmc.mybirdfeeder.net/GMCforum/index.php?t=msg&goto=156544&rid=0
Richard
|
| 15 |
Forum: GMCnet «»
Posted on: Wed, 03 June 2020 10:47 «»
By: 6cuda6
Re: [GMCnet] Dash air conditioning removal (Dave Simpson)
…i think the weight savings verses the effort may not gain you much. If i was looking to get rid of parts....anything eternal would be fair game as its just to much of a pain in the a** to get at the condenser, air doors etc in the box with really little …
|
| 16 |
Forum: GMCnet «»
Posted on: Wed, 03 June 2020 10:19 «»
By: David Simpson
[GMCnet] Dash air conditioning removal (Dave Simpson)
…have owned my coach for 3 years now and I've put many enjoyable
miles on it roaming between Toronto and Los Angeles but the dash air
conditioning has not worked since the day I bought it. That hasn't
been a concern as I find the wind wings are adequate …
|
| 17 |
Forum: GMCnet «»
Posted on: Sat, 30 May 2020 13:09 «»
By: Melbo
Re: Flush mount black tank vent?
…used an AAV on my bus conversion and something inside failed. I replaced it with a more robust model and had the same result. I am not sure the reason for either failure BUT I had to do a work around to get rid of the odor.
Just my experience.
…
|
| 18 |
Forum: GMCnet «»
Posted on: Tue, 26 May 2020 08:59 «»
By: Richard RV
Re: [GMCnet] Flush mount black tank vent?
…admittance valves are code compliant for most residential construction codes, but I'm not sure about installation in an RV, particularly on a black tank vent. A residential toilet has its own built in water seal that prevents sewer gases from rising …
|
| 19 |
Forum: GMCnet «»
Posted on: Sun, 17 May 2020 14:58 «»
By: Randy Hecht
Re: [GMCnet] New Ownership, New member, Long road ahead.
…GMCforum/index.php?t=msg&goto=352152&rid=0&srch=carb#msg_352152
>>
>> The bad:
>> - It backfired like crazy while driving after warming up
>> - I couldn't find the oil dipstick! Am I crazy? There seems to be an …
|
| 20 |
Forum: GMCnet «»
Posted on: Sun, 17 May 2020 13:58 «»
By: Mike Kelley
Re: [GMCnet] New Ownership, New member, Long road ahead.
…GMCforum/index.php?t=msg&goto=352152&rid=0&srch=carb#msg_352152
>
> The bad:
> - It backfired like crazy while driving after warming up
> - I couldn't find the oil dipstick! Am I crazy? There seems to be an oil fill tube …
|
GMCforum
Search
Help
Register
Login
Home