| |
2521 Search Results Found |
| 1 |
Forum: GMCnet «»
Posted on: Thu, 22 July 2021 19:24 «»
By: Silvernort
Convention etiquette - selling stuff
…have some GMC stuff that I want to get rid of/sell/give away but not really interested in the shipping hassels as most of it is big, heavy, worth much less than the shipping costs, etc. So I was wondering if I brought those things to a rally for said …
|
| 2 |
Forum: GMCnet «»
Posted on: Mon, 12 July 2021 18:49 «»
By: BobDunahugh
[GMCnet] EFI. One or two fuel pumps made clear.
…can use just one fuel pump with the GM/Howell EFI system if you wish. There is no correlation between the Howell system. And the pumps. Except that the pump has to deliver the proper volume, and pressure. I have the GM/Howell EFI, EBL. I do have two …
|
| 3 |
Forum: GMCnet «»
Posted on: Sat, 10 July 2021 10:14 «»
By: rjw
Re: LiFePo4 Below Freezing Temps
…
I am intrigued by the concept of getting rid of LA house batteries. My GMC also spends the winter in its own heated/air conditioned garage. Can you share with us approximate cost of your battery upgrade? I know my "new" converter/charger …
|
| 4 |
Forum: GMCnet «»
Posted on: Wed, 09 June 2021 20:47 «»
By: CLawson
Re: Turn Signal Activates Hazard Lights
…wanted to thank everyone for the great advice and support.
I bought the AutoZone replacement switch and borrowed their wheel puller and spring compression tools. The switch replacement went much easier than I ever would have imagined.
Here are some …
|
| 5 |
Forum: GMCnet «»
Posted on: Tue, 11 May 2021 22:36 «»
By: boybach
Re: Electro level - '77 Palm beach
…I found the plastic fitting impossible to seal up so after much buggering around, I cut the lines.
Tomorrow I'll be early at Coast Industrial hoses and fittings where I will purchase a new [brass] T piece and associated bits and a small length of …
|
| 6 |
Forum: GMCnet «»
Posted on: Wed, 14 April 2021 02:36 «»
By: Ken Burton
Re: for sale
http://www.gmc.mybirdfeeder.net/GMCforum/index.php?t=thread&frm_id=4&rid=12
|
| 7 |
Forum: GMCnet «»
Posted on: Wed, 07 April 2021 18:39 «»
By: MikeB
HVAC replacement
Has anyone replaced the entire GMC ac/defrost unit with a modern set up? I want to get rid of all of it and start fresh.
Thanks
|
| 8 |
Forum: GMCnet «»
Posted on: Mon, 05 April 2021 08:47 «»
By: Tom Katzenberger
Advance or Not to Advance?
…Guys,
I am installing a new timing set on an engine with 8,000 miles on it. it ran beautifully with the stock timing set, but I wanted to get rid of the 40 year old plastic gear set. I am replacing it with a Edelbrock double roller.
The question is…
|
| 9 |
Forum: GMCnet «»
Posted on: Sat, 20 March 2021 12:19 «»
By: James Hupy
[GMCnet] Re: Onan fuel line is very old
…of the reason for that filter nearly always staying clean is that it's
source of fuel is a stand pipe in the rear tank that only goes part way to
the bottom of the tank. That way, you can not dry camp and run completely
out of fuel running the Onan. …
|
| 10 |
Forum: GMCnet «»
Posted on: Sat, 20 March 2021 11:49 «»
By: Len Novak
[GMCnet] Re: Onan fuel line is very old
…pulled mine apart to clean it. Something about if it is not broke don’t
fix it comes to mind in my case. Nothing in the screen.
On Fri, Mar 19, 2021 at 22:58 Ken Burton wrote:
> I reworded some of this posting and for emailers that do not see …
|
| 11 |
Forum: GMCnet «»
Posted on: Sat, 20 March 2021 00:58 «»
By: Ken Burton
Re: Onan fuel line is very old
I reworded some of this posting and for emailers that do not see updates you might want to look here for the updated version
http://www.gmc.mybirdfeeder.net/GMCforum/index.php?t=tree&goto=362925&rid=12#msg_362925
|
| 12 |
Forum: GMCnet «»
Posted on: Thu, 04 March 2021 19:58 «»
By: Carl S.
Cadillac Engines/Parts
…friend of a friend here in Tucson has several Cadillac 500 blocks/cranks/heads, etc that he would like to get rid of. The problem is that he is not particularly interested in shipping, so they would likely be for local pick up only.
He also has at …
|
| 13 |
Forum: GMCnet «»
Posted on: Sun, 28 February 2021 23:39 «»
By: Keith V
Re: [GMCnet] Just got Keith V's Micro Level System. VERY impressive.
…for the kind words Bob!
Yes you get to remove a lot of air line, I do recommend all the air line is replaced, it's usually very old and often brittle.
Bob loaned me a EL2 system so we can create a solid wiring diagram. I should have that in a few days
…
|
| 14 |
Forum: GMCnet «»
Posted on: Sun, 28 February 2021 15:47 «»
By: Tom Katzenberger
Re: [GMCnet] Just got Keith V's Micro Level System. VERY impressive.
It appears that one does get rid of quite a few air lines. I do like the the camp mode.
|
| 15 |
Forum: GMCnet «»
Posted on: Sat, 13 February 2021 11:02 «»
By: jhbridges
Re: Age restrictions?
…stay in camps on base where there is one convenient. They run the gamut from ice orderly layouts wit amenities to basically homesteaders in tarpaper shacks on what were once wheels. D O D is trying to get rid of the homesteaders. The way to do this is …
|
| 16 |
Forum: GMCnet «»
Posted on: Tue, 09 February 2021 09:21 «»
By: Matt Colie
Re: [GMCnet] Aerodynamics
…
Unfortunately, what the 0.3CD only tells you is how it relates to a prismatic (block shape) of the same basic dimensions. It is still a 9'tall, 8' wide and 26(23)' block, it will just not be as draggy.
From my short time working at a UofM aero …
|
| 17 |
Forum: GMCnet «»
Posted on: Fri, 05 February 2021 13:58 «»
By: James Hupy
Re: [GMCnet] Fridge
…12 volt fire was caused by a combination of things. The battery box
floor was rusted through, allowing the batteries to slide forward and tip
towards the ground. The second thing was that the wrong batteries were
installed in the coach by Les Shwabs in …
|
| 18 |
Forum: GMCnet «»
Posted on: Thu, 04 February 2021 19:36 «»
By: Larry
Re: Apologies to my knuckles
Doug,
While you are at it, take a minute to read this. Something else to check on your lower A arm. JWID
http://gmc.mybirdfeeder.net/GMCforum/index.php?t=msg&th=39459&start=0&rid=19
|
| 19 |
Forum: GMCnet «»
Posted on: Sat, 30 January 2021 15:09 «»
By: kingd
Re: What a day.
…Ken B, I don't know if you remember who I am but I met you at one of Matt C's brunches at some place in Michigan.
I spent more than 25 years at IBM Toronto Manufacturing most of it as a pencil pushed in what they now call materials
management. When the …
|
| 20 |
Forum: GMCnet «»
Posted on: Wed, 20 January 2021 20:03 «»
By: Richard RV
1000 Watt Rust Removing Laser
…thing is unbelievable.
https://youtu.be/ACGSzBXKONo
It evaporates the rust and grime but does not eat up the underlying metal. It won't damage skin. It can probably core a apple!
I'd love to get in a pit under a coach and get rid of all of the …
|
GMCforum
Search
Help
Register
Login
Home