GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.
Home » Public Forums » GMCnet » Oil Temp Sensor
Oil Temp Sensor [message #371462] Mon, 14 August 2023 06:36 Go to next message
Bruce Hart is currently offline  Bruce Hart   United States
Messages: 1500
Registered: October 2011
Location: La Grange, Wyoming
Karma: 5
Senior Member
I am wanting to install an oil temperature sensor but don't want to put a hole in the oil pan. Is there another location I can use?

Bruce Hart 1976 Palm Beach 1977 28' Kingsley La Grange, Wyoming

Report message to a moderator

Re: Oil Temp Sensor [message #371463 is a reply to message #371462] Mon, 14 August 2023 12:21 Go to previous messageGo to next message
roy1 is currently offline  roy1   Canada
Messages: 2126
Registered: July 2004
Location: Minden nevada
Karma: 6
Senior Member
I put mine in the oil pan. However you should be able to find a place to drill and tap a spot on the oil filter bypass for a small electric sensor.

Roy Keen Minden,NV 76 X Glenbrook

Report message to a moderator

Re: Oil Temp Sensor [message #371464 is a reply to message #371462] Wed, 16 August 2023 17:37 Go to previous messageGo to next message
Matt Colie is currently offline  Matt Colie   United States
Messages: 8547
Registered: March 2007
Location: S.E. Michigan
Karma: 7
Senior Member
Bruce,
I have Digipanel and I just clamped the sensor to the steel oil line going to the cooler. It seems to track as I expect.
Matt_C

Matt & Mary Colie - Chaumière -'73 Glacier 23 - Members GMCMI, GMCGL, GMCES
Electronically Controlled Quiet Engine Cooling Fan with OE Rear Drum Brakes with Applied Control Arms
SE Michigan - Near DTW - Twixt A2 and Detroit

Report message to a moderator

Re: Oil Temp Sensor [message #371468 is a reply to message #371463] Fri, 18 August 2023 05:21 Go to previous message
Bruce Hart is currently offline  Bruce Hart   United States
Messages: 1500
Registered: October 2011
Location: La Grange, Wyoming
Karma: 5
Senior Member
Thanks Roy, I tapped into the oil filter housing on the out going line.

Bruce Hart 1976 Palm Beach 1977 28' Kingsley La Grange, Wyoming

Report message to a moderator

Previous Topic: GMC in the mud
Next Topic: Fuel tank design
Goto Forum:
  


Current Time: Mon May 06 09:19:17 CDT 2024

Total time taken to generate the page: 0.00967 seconds
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.1.
Copyright ©2001-2021 FUDforum Bulletin Board Software