Re: Non-linear speedometer error [message #370682 is a reply to message #370652] |
Tue, 11 October 2022 21:01 |
Tom Katzenberger
Messages: 399 Registered: June 2019 Location: Kingsville, MD
Karma: 4
|
Senior Member |
|
|
Bruce and bill,
Should I install the SBI100GT at this point, as I already have it? I also would like to install the electronic cruise control at a later date.. Also, what about the filter? Is there a brand and model you would recommend if you recommend one?
Thanks in advance for your advice and input.
Take care,
Tom K.
Tom & Oki Katzenberger,
Kingsville, Maryland,
1977 23' Birchaven, 455 C.I.D., Micro Level, Howell EBL-EFI Spark Control, Macerator, York Air Compressor, 6 Wheel Disc, Quadra Bag, Onan W/Bovee Ignition
|
|
|
Re: Non-linear speedometer error [message #370683 is a reply to message #370682] |
Tue, 11 October 2022 23:59 |
Bill Van Vlack
Messages: 419 Registered: September 2015 Location: Guemes Island, Washington
Karma: 14
|
Senior Member |
|
|
The VSS filter is a setting in TunerPro. If you haven't loaded a BIN into TunerPro, changed a setting (it's under 'Scaler' in TunerPro) and then flashed the revised BIN to the EBL using WUD, here is a link to the DynamicEFI site where it's explained... https://www.dynamicefi.com/Tune_Intro.php
Bill Van Vlack
'76 Royale; Guemes Island, Washington; Twin bed, full (DS) side bath, Brazilian Redwood counter and settee tops,455, 6KW generator; new owner a/o mid November 2015.
|
|
|