Home » Public Forums » GMCnet » [GMCnet] Olds or Buick 455
[GMCnet] Re: Olds or Buick 455 [message #370056 is a reply to message #370055] |
Tue, 28 June 2022 10:30 |
gmc-email-list
Messages: 124 Registered: February 2019
Karma: 2
|
Senior Member |
|
|
Eric
I have had my GMC for 38 years now and over the years I collected manuals and other information. I used to send out a dvd with this information to new members and others who requested it at no charge.
I sent one to Tom Lins free but he then copied it and charged GMcers for a copy. This disturbed me so I quit giving it away. I put all my information on the GMCMI site and GMCMI asked me if they could distribute it on a Thumb drive and I gave them permission.
I continue to collect new information and I give that to GMCMI but not to Tom Lins.
I have never charged anyone for the files.
Emery Stora
> On Jun 28, 2022, at 7:38 AM, Eric Roell wrote:
>
> Thank you to all for the responses and support.I am a GMCMI member and have the USB from Kim Weeks and also Thomas Lins. I am still fresh to working on my coach and finding the various specifications throughout all the documentation is all unfamiliar with me.I will get there as I work on the coach and start putting some miles on it.Cheers!
> Eric Roell, Aurora, Ontario76 Glenbrook "Safari" 76,000 miles,Alcoa, Continental Kit, Fender Flares, Stainless Exhaust, Macerator, Ragusa Step
>
> On Saturday, June 25, 2022, 10:30:04 a.m. EDT, John Wright wrote:
>
> Eric,
> The GMC TZE is NOT going to appear on any parts store computers. If you
> have a 455 then I always use the 75 toronado as a base search. For those
> of you that have a 403 I use the 77 toronado.
>
> Your local auto parts store should be able to supply what you need. For
> speciality items then you can check with the GMC suppliers and some have
> low cost shipping to Canada.
>
> IF you were a member of GMCMI and had the parts catalog in your hot hands
> then you would be way far ahead. Just suggesting.
>
> gmcmi.com
> Good organization and has registered world wide.
>
> Might check if you have a local as they can be a real help and you're
> really not alone!! Don't know your location so I cannot point you in the
> right direction for a local club.
>
> Regards,
>
> John "J.R." Wright
> GMC Great Laker
> GMCGL Tech Editor
> GMC Eastern States
> GMCMHI
> TZE Zone Restorations
> 78 Buskirk Custom 29.5' Stretch
> 75 Avion (Under going Frame up Restoration)
>
>
>
>> On Sat, Jun 25, 2022 at 12:37 AM Jim Kanomata wrote:
>>
>> Ok
>>
>>
>>> On Fri, Jun 24, 2022 at 6:03 PM CJV wrote:
>>>
>>> I'm not ignoring you Jim, but this author is in Canada and these
>> suppliers
>>> are closer to him....
>>>
>>> CJ Vermeulen, Scribbler
>>>
>>>
>>> From: "Jim Kanomata"
>>> To: "gmclist"
>>> Sent: Friday, 24 June, 2022 16:30:12
>>> Subject: [GMCnet] Re: Olds or Buick 455
>>>
>>> We have the correct parts in stock and can assist you on GMC MH tech
>>> assistance.
>>> We are the largest supplier of Parts and Kits .Give us a call
>> 800-752-7502
>>> _______________________________________________
>>> GMCnet mailing list
>>> Unsubscribe or Change List Options:
>>>
>>
>>
>> --
>> Jim Kanomata ASE
>> Applied/GMC, Newark,CA
>> jimk@appliedairfilters.com
>> http://www.gmcrvparts.com
>> 1-800-752-7502
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
|
|
|
[GMCnet] Re: Olds or Buick 455 [message #370057 is a reply to message #370013] |
Tue, 28 June 2022 12:51 |
gmc-email-list
Messages: 124 Registered: February 2019
Karma: 2
|
Senior Member |
|
|
An Olds engine.
Emery Stora
emerystora@mac.com
> On Jun 24, 2022, at 1:12 PM, Eric Roell wrote:
>
> Is the 1976 455 a Buick or Olds engine?
> The resources in Ontario, and Canada, are far less than what is available in USA, and virtually no one has a GMC TZE listed in their database. I am trying to source Dist Cap, Rotor and wires for my 76' Glenbrook and supposedly there is a difference in the parts for a Olds and Buick 455.
> Eric Roell, Aurora, Ontario76 Glenbrook "Safari" 76,000 miles,Alcoa, Continental Kit, Fender Flares, Stainless Exhaust, Macerator, Ragusa Step
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
|
|
|
[GMCnet] Re: Olds or Buick 455 [message #370058 is a reply to message #370057] |
Tue, 28 June 2022 15:44 |
Chris McBride
Messages: 35 Registered: June 2021
Karma: 0
|
Member |
|
|
Thanks Emery.
Eric Roell, Aurora, Ontario76 Glenbrook "Safari" 76,000 miles,Alcoa, Continental Kit, Fender Flares, Stainless Exhaust, Macerator, Ragusa Step
On Tuesday, June 28, 2022, 01:52:04 p.m. EDT, Emery Stora via Gmclist wrote:
An Olds engine.
Emery Stora
emerystora@mac.com
> On Jun 24, 2022, at 1:12 PM, Eric Roell wrote:
>
> Is the 1976 455 a Buick or Olds engine?
> The resources in Ontario, and Canada, are far less than what is available in USA, and virtually no one has a GMC TZE listed in their database. I am trying to source Dist Cap, Rotor and wires for my 76' Glenbrook and supposedly there is a difference in the parts for a Olds and Buick 455.
> Eric Roell, Aurora, Ontario76 Glenbrook "Safari" 76,000 miles,Alcoa, Continental Kit, Fender Flares, Stainless Exhaust, Macerator, Ragusa Step
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
|
|
|
[GMCnet] Re: Olds or Buick 455 [message #370059 is a reply to message #370056] |
Tue, 28 June 2022 16:13 |
Chris McBride
Messages: 35 Registered: June 2021
Karma: 0
|
Member |
|
|
Thanks Emery,Had I known that a year ago when I purchased my GMC, I would have paid Tom Lins for virtually the same, or less information.
Eric Roell, Aurora, Ontario76 Glenbrook "Safari" 76,000 miles,Alcoa, Continental Kit, Fender Flares, Stainless Exhaust, Macerator, Ragusa Step
On Tuesday, June 28, 2022, 11:30:48 a.m. EDT, Emery Stora via Gmclist wrote:
Eric
I have had my GMC for 38 years now and over the years I collected manuals and other information. I used to send out a dvd with this information to new members and others who requested it at no charge.
I sent one to Tom Lins free but he then copied it and charged GMcers for a copy. This disturbed me so I quit giving it away. I put all my information on the GMCMI site and GMCMI asked me if they could distribute it on a Thumb drive and I gave them permission.
I continue to collect new information and I give that to GMCMI but not to Tom Lins.
I have never charged anyone for the files.
Emery Stora
> On Jun 28, 2022, at 7:38 AM, Eric Roell wrote:
>
> Thank you to all for the responses and support.I am a GMCMI member and have the USB from Kim Weeks and also Thomas Lins. I am still fresh to working on my coach and finding the various specifications throughout all the documentation is all unfamiliar with me.I will get there as I work on the coach and start putting some miles on it.Cheers!
> Eric Roell, Aurora, Ontario76 Glenbrook "Safari" 76,000 miles,Alcoa, Continental Kit, Fender Flares, Stainless Exhaust, Macerator, Ragusa Step
>
> On Saturday, June 25, 2022, 10:30:04 a.m. EDT, John Wright wrote:
>
> Eric,
> The GMC TZE is NOT going to appear on any parts store computers. If you
> have a 455 then I always use the 75 toronado as a base search. For those
> of you that have a 403 I use the 77 toronado.
>
> Your local auto parts store should be able to supply what you need. For
> speciality items then you can check with the GMC suppliers and some have
> low cost shipping to Canada.
>
> IF you were a member of GMCMI and had the parts catalog in your hot hands
> then you would be way far ahead. Just suggesting.
>
> gmcmi.com
> Good organization and has registered world wide.
>
> Might check if you have a local as they can be a real help and you're
> really not alone!! Don't know your location so I cannot point you in the
> right direction for a local club.
>
> Regards,
>
> John "J.R." Wright
> GMC Great Laker
> GMCGL Tech Editor
> GMC Eastern States
> GMCMHI
> TZE Zone Restorations
> 78 Buskirk Custom 29.5' Stretch
> 75 Avion (Under going Frame up Restoration)
>
>
>
>> On Sat, Jun 25, 2022 at 12:37 AM Jim Kanomata wrote:
>>
>> Ok
>>
>>
>>> On Fri, Jun 24, 2022 at 6:03 PM CJV wrote:
>>>
>>> I'm not ignoring you Jim, but this author is in Canada and these
>> suppliers
>>> are closer to him....
>>>
>>> CJ Vermeulen, Scribbler
>>>
>>>
>>> From: "Jim Kanomata"
>>> To: "gmclist"
>>> Sent: Friday, 24 June, 2022 16:30:12
>>> Subject: [GMCnet] Re: Olds or Buick 455
>>>
>>> We have the correct parts in stock and can assist you on GMC MH tech
>>> assistance.
>>> We are the largest supplier of Parts and Kits .Give us a call
>> 800-752-7502
>>> _______________________________________________
>>> GMCnet mailing list
>>> Unsubscribe or Change List Options:
>>>
>>
>>
>> --
>> Jim Kanomata ASE
>> Applied/GMC, Newark,CA
>> jimk@appliedairfilters.com
>> http://www.gmcrvparts.com
>> 1-800-752-7502
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
|
|
|
Goto Forum:
Current Time: Thu May 02 10:20:38 CDT 2024
Total time taken to generate the page: 0.01385 seconds
|