WD-40 EZ-REACH [message #327160] |
Fri, 15 December 2017 22:37 |
Ken Burton
Messages: 10030 Registered: January 2004 Location: Hebron, Indiana
Karma: 10
|
Senior Member |
|
|
I do not have much use for WD-40 but this flexible straw is worth looking at.
https://www.homedepot.com/p/WD-40-14-4-oz-Multi-Use-Product-EZ-REACH-490191/205938069
I have only seen it in the automotive section of Wal-Mart. I bought one and threw away the can. I kept the spout and it snaps on various other products. I have used it on PB-Blaster, Kroil, and some silicone but I forget the brand. It was great for sticking in a spark plug hole and spraying oil in various direction to oil the entire circumference of the pistons.
Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana
|
|
|
Re: [GMCnet] WD-40 EZ-REACH [message #327165 is a reply to message #327160] |
Sat, 16 December 2017 06:01 |
Ken Henderson
Messages: 8726 Registered: March 2004 Location: Americus, GA
Karma: 9
|
Senior Member |
|
|
So, sounds like I should be glad SHE couldn't figure out how to work it and
passed ii on to me last Thursday. :>}
Ken H.
On Fri, Dec 15, 2017 at 11:37 PM, Ken Burton wrote:
> I do not have much use for WD-40 but this flexible straw is worth looking
> at.
>
> https://www.homedepot.com/p/WD-40-14-4-oz-Multi-Use-
> Product-EZ-REACH-490191/205938069
>
> I have only seen it in the automotive section of Wal-Mart. I bought one
> and threw away the can. I kept the spout and it snaps on various other
> products. I have used it on PB-Blaster, Kroil, and some silicone but I
> forget the brand. It was great for sticking in a spark plug hole and
> spraying
> oil in various direction to oil the entire circumference of the pistons.
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Ken Henderson
Americus, GA
www.gmcwipersetc.com
Large Wiring Diagrams
76 X-Birchaven
76 X-Palm Beach
|
|
|
Re: [GMCnet] WD-40 EZ-REACH [message #327166 is a reply to message #327165] |
Sat, 16 December 2017 06:53 |
Ken Burton
Messages: 10030 Registered: January 2004 Location: Hebron, Indiana
Karma: 10
|
Senior Member |
|
|
Yes, Just pivot the spout up like you want to use it then push upon the plastic housing on the can. It will come off without damage and can be used on other cans.
Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana
|
|
|