GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » GMC » GMC Swap Meet » Looking for engine cover pins
Looking for engine cover pins [message #325908] Fri, 10 November 2017 05:22 Go to next message
Will Albers is currently offline  Will Albers   United States
Messages: 24
Registered: November 2017
Location: Detroit MI (Belleville)
Karma: 0
Junior Member
My coach has the receivers but no pins. Does anyone have a set, or recommend something that i can use locally?

1978 Palm Beach.
Detroit Michigan
In need of several pieces to replace water damage
Re: Looking for engine cover pins [message #325917 is a reply to message #325908] Fri, 10 November 2017 11:15 Go to previous messageGo to next message
roy1 is currently offline  roy1   United States
Messages: 1920
Registered: July 2004
Location: Minden nevada
Karma: 9
Senior Member
Possibly Napa auto parts or Ace hardware may have split pins. An old drill shank may have the correct od but don't force it if it is too large.

Roy Keen Minden,NV 76 X Glenbrook
Re: Looking for engine cover pins [message #325918 is a reply to message #325908] Fri, 10 November 2017 11:19 Go to previous messageGo to next message
77Royale   United States
Messages: 352
Registered: June 2014
Location: Mid Michigan
Karma: 4
Senior Member
Id grab them from Applied.

http://www.appliedgmc.com/prod.itml/icOid/862


77 Royale, Rear Dry Bath. 403, 3.55 Final Drive, Lenzi goodies, Patterson carb and dizzy. Mid Michigan
Re: Looking for engine cover pins [message #325932 is a reply to message #325917] Sat, 11 November 2017 00:01 Go to previous message
roy1 is currently offline  roy1   United States
Messages: 1920
Registered: July 2004
Location: Minden nevada
Karma: 9
Senior Member
Didn't quite get what pins you needed. If it is the hatch parts Jim k is your guy for sure

Roy Keen Minden,NV 76 X Glenbrook
Previous Topic: 1975 GMC Avion 26' $8500
Next Topic: NuTone Food Center Base and Attachments
Goto Forum:
  


Current Time: Mon Dec 11 20:47:34 CST 2017

Total time taken to generate the page: 0.03217 seconds