GMCforum: GMC Swap Meet » Looking for engine cover pins

Home » Public Forums » GMC Swap Meet » Looking for engine cover pins

Fri, 10 November 2017 05:22

Will Albers

Messages: 183
Registered: November 2017
Location: Detroit MI (Belleville)

Karma: 2

Senior Member

My coach has the receivers but no pins. Does anyone have a set, or recommend something that i can use locally?

1978 Palm Beach.
Detroit Michigan

Fri, 10 November 2017 11:15

roy1

Messages: 2126
Registered: July 2004
Location: Minden nevada

Karma: 6

Senior Member

Possibly Napa auto parts or Ace hardware may have split pins. An old drill shank may have the correct od but don't force it if it is too large.

Roy Keen Minden,NV 76 X Glenbrook

Fri, 10 November 2017 11:19

77Royale

Messages: 461
Registered: June 2014
Location: Mid Michigan

Karma: 6

Senior Member

77 Royale, Rear Dry Bath. 403, 3.55 Final Drive, Lenzi goodies, Patterson carb and dizzy. Mid Michigan

Sat, 11 November 2017 00:01

roy1

Messages: 2126
Registered: July 2004
Location: Minden nevada

Karma: 6

Senior Member

Didn't quite get what pins you needed. If it is the hatch parts Jim k is your guy for sure

Roy Keen Minden,NV 76 X Glenbrook

Previous Topic:	1975 GMC Avion 26' $8500
Next Topic:	NuTone Food Center Base and Attachments

Goto Forum:

Current Time: Thu Apr 18 00:11:27 CDT 2024

Total time taken to generate the page: 0.01359 seconds