GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Wire Labeling
Wire Labeling [message #323268] Sun, 03 September 2017 20:31 Go to next message
JShot is currently offline  JShot   United States
Messages: 485
Registered: October 2006
Location: NW Ohio
Karma: 0
Senior Member
So, here's a question regarding what some of us have done, but maybe some of the newbies might not know.

When labeling wires, under hood, dash, wherever,

do you label both ends, or just one?

do you label each end where that wire comes from, or where it is going?

do you label each end with a number, presumably with the same number on each end, and then write down in a 'book' where the wire goes and comes from, its color and size?

Just wondering what everyone does...

John


John Shotwell
Ridgeville Corners, OH
78 Royale Center Kitchen
Re: Wire Labeling [message #323270 is a reply to message #323268] Sun, 03 September 2017 20:46 Go to previous messageGo to next message
Ken Burton is currently offline  Ken Burton   United States
Messages: 10030
Registered: January 2004
Location: Hebron, Indiana
Karma: 10
Senior Member
i label the ends as to what they attach to. "Fuse 3" or "fan relay pin 2"

Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana
Re: Wire Labeling [message #323273 is a reply to message #323268] Sun, 03 September 2017 21:50 Go to previous messageGo to next message
kerry pinkerton is currently offline  kerry pinkerton   United States
Messages: 2565
Registered: July 2012
Location: Harvest, Al
Karma: 15
Senior Member
I gotta tell this story. Some of you guys know Stick Miller and most know Ken Henderson. Well, if you've ever seen Ken's coach, every wire is neat and labeled with a Brother label maker. Stick lives in Americus near Ken and Ken 'helped' Stick quite a bit on his various coaches. One day they did something and Ken told Stick something to the effect "I've got to go in but before you go label those wires we put in today."


The next day when Stick came over he raised the hood to show Ken his wire labels. Ken looked in and sure enough the wires were neatly labled...Red wire...White wire...Black wire....


Kerry Pinkerton - North Alabama Had 5 over the years. Currently have a '06 Fleetwood Discovery 39L
Re: [GMCnet] Wire Labeling [message #323284 is a reply to message #323273] Mon, 04 September 2017 08:59 Go to previous messageGo to next message
Richard Denney is currently offline  Richard Denney   United States
Messages: 920
Registered: April 2010
Karma: 9
Senior Member
That is classic Ken and classic Stick.

I once asked Ken if he had enough labels (there are dozens if not hundreds
on his coach), and his response was that they weren't all labeled, so
obviously not.

I suspect his strategy is that any time he has to identify a wire, he
labels it, no matter what end he's working on.

Rick "who means well but just can't be bothered" Denney

On Sun, Sep 3, 2017 at 10:51 PM Kerry Pinkerton
wrote:

> I gotta tell this story. Some of you guys know Stick Miller and most know
> Ken Henderson. Well, if you've ever seen Ken's coach, every wire is neat
> and labeled with a Brother label maker. Stick lives in Americus near Ken
> and Ken 'helped' Stick quite a bit on his various coaches. One day they did
> something and Ken told Stick something to the effect "I've got to go in
> but before you go label those wires we put in today."
>
>
> The next day when Stick came over he raised the hood to show Ken his wire
> labels. Ken looked in and sure enough the wires were neatly labled...Red
> wire...White wire...Black wire....
>
> --
> Kerry Pinkerton - North Alabama
>
> Had 5 over the years. Still have the first a 76 that will be rebodied
> into an art deco car hauler.
>
> http://www.bdub.net/pinkerton/
>
> '03 Fleetwood Discovery 39L
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
--
Rick Denney
73 x-Glacier 230 "Jaws"
Off-list email to rick at rickdenney dot com
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

Re: [GMCnet] Wire Labeling [message #323285 is a reply to message #323284] Mon, 04 September 2017 09:15 Go to previous message
James Hupy is currently offline  James Hupy   United States
Messages: 6806
Registered: May 2010
Karma: -62
Senior Member
My wife Judy's first husbands father in law had a compulsion to label
everything he ever purchased, with the date of purchase, cost, and location
of purchase. That went for washers and dryers, mop buckets, everything.
When we helped clean out their house when they could no longer manage for
themselves, everything in the house was labeled with magic marker and
string tags. We chuckled about that for a long time. But, Col. Ken has a
good, valid, reason for his labels. He has a huge bunch of additional
stuff mounted in his coach, nobody could remember all that without labels.
Jim Hupy

On Sep 4, 2017 7:00 AM, "Richard Denney" wrote:

That is classic Ken and classic Stick.

I once asked Ken if he had enough labels (there are dozens if not hundreds
on his coach), and his response was that they weren't all labeled, so
obviously not.

I suspect his strategy is that any time he has to identify a wire, he
labels it, no matter what end he's working on.

Rick "who means well but just can't be bothered" Denney

On Sun, Sep 3, 2017 at 10:51 PM Kerry Pinkerton
wrote:

> I gotta tell this story. Some of you guys know Stick Miller and most know
> Ken Henderson. Well, if you've ever seen Ken's coach, every wire is neat
> and labeled with a Brother label maker. Stick lives in Americus near Ken
> and Ken 'helped' Stick quite a bit on his various coaches. One day they
did
> something and Ken told Stick something to the effect "I've got to go in
> but before you go label those wires we put in today."
>
>
> The next day when Stick came over he raised the hood to show Ken his wire
> labels. Ken looked in and sure enough the wires were neatly labled...Red
> wire...White wire...Black wire....
>
> --
> Kerry Pinkerton - North Alabama
>
> Had 5 over the years. Still have the first a 76 that will be rebodied
> into an art deco car hauler.
>
> http://www.bdub.net/pinkerton/
>
> '03 Fleetwood Discovery 39L
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
--
Rick Denney
73 x-Glacier 230 "Jaws"
Off-list email to rick at rickdenney dot com
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

Previous Topic: [GMCnet] Gray and black water tank readings
Next Topic: As my jouney continues.... That frikken power loss problem on Gatsbys' Cruiser
Goto Forum:
  


Current Time: Thu Apr 25 10:22:34 CDT 2024

Total time taken to generate the page: 0.01995 seconds