GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.
Home » Public Forums » GMCnet » Re: [GMCnet] part # for dash / heater control?
Re: [GMCnet] part # for dash / heater control? [message #319423] Wed, 21 June 2017 20:24 Go to next message
BobDunahugh is currently offline  BobDunahugh   United States
Messages: 2465
Registered: October 2010
Location: Cedar Rapids, IA
Karma: 11
Senior Member
I ran into this same issue from brand to brand with #. Got the correct Delco switch from Applied. Fit, and worked the first time at a fair price. Bob Dunahugh 78 Royale
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

Report message to a moderator

Re: [GMCnet] part # for dash / heater control? [message #319436 is a reply to message #319423] Wed, 21 June 2017 22:05 Go to previous messageGo to next message
BobDunahugh is currently offline  BobDunahugh   United States
Messages: 2465
Registered: October 2010
Location: Cedar Rapids, IA
Karma: 11
Senior Member

It just sunk in. I thought this was about the blower switch. Blew it twice tonight. Bob Dunahugh
________________________________
From: Bob Dunahugh
Sent: Wednesday, June 21, 2017 8:24 PM
To: gmclist@list.gmcnet.org
Subject: RE: part # for dash / heater control?


I ran into this same issue from brand to brand with #. Got the correct Delco switch from Applied. Fit, and worked the first time at a fair price. Bob Dunahugh 78 Royale
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

Report message to a moderator

Re: [GMCnet] part # for dash / heater control? [message #319462 is a reply to message #319423] Thu, 22 June 2017 13:41 Go to previous message
Ek_Lektro is currently offline  Ek_Lektro   United States
Messages: 167
Registered: March 2011
Karma: 2
Senior Member
actually Bob, your reply got me looking on Applied’s site,
and the part is there… but rare!
http://www.appliedgmc.com/prod.itml/icOid/1039
$289… (out of budget range for me right now)

> I ran into this same issue from brand to brand with #. Got the correct Delco switch from Applied. Fit, and worked the first time at a fair price. Bob Dunahugh 78 Royale

So we’ll try the rebuilding options,… probably next time i’m down in Tijuana, where i can get some experienced help.
(Thanks for posting those links Mark)

> Electrical
> http://www.gmcmhphotos.com/photos/hvac-dash-and-blower-control/p58077-hvac-control-panel-function-switch.html
>
> Vacuum
> http://gmcmotorhome.info/heat.html#CONTROL


My current switch in the ’78 works… mostly…
The one in my ’76 needs more attention.
So now that we know what that sucker’s worth, we’ll see about fixing it up!

thanks again, cheers!
Greg
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

Report message to a moderator

Previous Topic: [GMCnet] Godd Sam Roadside Assistence
Next Topic: Re: [GMCnet] Brazing aluminum ac line issues
Goto Forum:
  


Current Time: Fri Apr 19 23:44:48 CDT 2024

Total time taken to generate the page: 0.01019 seconds
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.1.
Copyright ©2001-2021 FUDforum Bulletin Board Software