GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Norcold refrigerator install (flexible vent material)
Norcold refrigerator install [message #310014] Sun, 06 November 2016 19:10 Go to next message
Jack Ramsey is currently offline  Jack Ramsey   United States
Messages: 82
Registered: December 2012
Location: Tulare, CA
Karma: 1
Member
I am finishing up the Norcold 2 way and have built a complete insulated structure and venting as per all the instructions and recommendations, including the divider to keep the hot exhaust off the top of the NXA614. Before I seal it in, I need to install some sort of flexible material between the insulated structure and the body exhaust vent on the roof. What is the best material for this? I am thinking it would be the best way to keep propane exhaust out of the living area to use some fabric type material for this area and around the side fresh air intake so the loop is isolated from the interior living area.

Thanks,

Jack


Jack Ramsey Tulare, CA TZE165V101526 1975 Palm Beach
Re: Norcold refrigerator install [message #310081 is a reply to message #310014] Tue, 08 November 2016 09:40 Go to previous message
jhbridges is currently offline  jhbridges   United States
Messages: 8412
Registered: May 2011
Location: Braselton ga
Karma: -74
Senior Member
Go down to the HVAC supply store and look at 'duct isolators' which we used to isolate the A/C ducts where they went through sound - proof walls. They com in several sizes, and there might be one co=lose enough for your purposes.

--johnny


Foolish Carriage, 76 26' Eleganza(?) with beaucoup mods and add - ons. Braselton, Ga. I forgive them all, save those who hurt the dogs. They must answer to me in hell
Previous Topic: [GMCnet] We built our dream GMC.
Next Topic: [GMCnet] Pulling the 6000w Owan. Are you kiding me. Just 8 -1/4 inch bolts.
Goto Forum:
  


Current Time: Thu Mar 28 12:36:07 CDT 2024

Total time taken to generate the page: 0.02310 seconds