Removed bed, reinstalling side facing settee in 77 Palm Beach [message #303435] |
Mon, 11 July 2016 21:00 |
Thomasn
Messages: 2 Registered: July 2016
Karma: 0
|
Junior Member |
|
|
Just got the coach,PO had built a permanent bed but kept the original side-facing settees. We are going back to the original configuration, but don't have the installation hardware, and can't find any pictures or documentation for how these seats get attached/installed. Any pictures/info about parts would be appreciated!
|
|
|
Re: Removed bed, reinstalling side facing settee in 77 Palm Beach [message #303437 is a reply to message #303435] |
Mon, 11 July 2016 21:19 |
A Hamilto
Messages: 4508 Registered: April 2011
Karma: 39
|
Senior Member |
|
|
Thomasn wrote on Mon, 11 July 2016 21:00Just got the coach,PO had built a permanent bed but kept the original side-facing settees. We are going back to the original configuration, but don't have the installation hardware, and can't find any pictures or documentation for how these seats get attached/installed. Any pictures/info about parts would be appreciated! PM me your email address and I will forward an email note I got from Bob Burkitt with pictures and instructions.
The brackets are just steel angles and screws and bolts. Once you see them you can decide if you want to make your own or have them fabricated by a pro. I made mine out of wood.
I seem to recall some drawings somewhere. If I find them, I will post links.
|
|
|