Re: [GMCnet] 3D printed bunk latch cover [message #290153 is a reply to message #289518] |
Mon, 09 November 2015 13:50 |
Terry Taylor
Messages: 113 Registered: October 2004 Location: San Lorenzo, CA
Karma: 0
|
Senior Member |
|
|
Just for clarification, the one on the left is the original part and the
one on the right is the 3D printed part.
On Mon, Nov 9, 2015 at 11:49 AM, Terry Taylor wrote:
> I had some time this weekend and borrowed a cover from a friends coach and
> created a 3D drawing of it. Below is the link. I have some durability
> testing to do on this part, but should be able to add them to my online
> store in December or January.
>
> https://dl.dropboxusercontent.com/u/14604450/20151109_084136.jpg
>
> I DID print Dan's design and either there are two sizes of these things or
> my software did not scale them properly, as his design is MUCH bigger than
> mine
>
> On Thu, Oct 29, 2015 at 7:16 AM, Len Novak wrote:
>
>> I was thinking more of a plastic that had some give or spring to it.
>>
>> Len and Pat Novak
>> 1978 GMC Kingsley
>> The Beast II with dash lights that work and labels you can see!
>> Fallbrook, CA new email: B52Rule@Roadrunner.Com
>> http://www.gmcmhphotos.com/photos/showgallery.php?cat=4375
>>
>> www.bdub.net/novak/
>>
>>
>>
>>
>> -----Original Message-----
>> From: Gmclist [mailto:gmclist-bounces@list.gmcnet.org] On Behalf Of Terry
>> Taylor
>> Sent: Tuesday, October 27, 2015 5:35 PM
>> To: gmclist@list.gmcnet.org
>> Subject: Re: [GMCnet] 3D printed bunk latch cover
>>
>> On 10/27/2015 4:02 PM, Len Novak wrote:
>> I have the bezel mostly modeled, the problem is that the retaining clip is
>> stamped steel. Still working on ideas.
>>
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>
>>
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>
>
>
>
> --
> Terry Taylor
> 74 ex-Eleganza SE
> San Lorenzo. CA
>
> Merchandise Web Site: http://www.dldesignstore.com
> Duct tape is like the force.....
> It has a light side and a dark side and
> It holds the galaxy together.
>
--
Terry Taylor
74 ex-Eleganza SE
San Lorenzo. CA
Merchandise Web Site: http://www.dldesignstore.com
Duct tape is like the force.....
It has a light side and a dark side and
It holds the galaxy together.
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
|
|
|
Re: [GMCnet] 3D printed bunk latch cover [message #290154 is a reply to message #289647] |
Mon, 09 November 2015 13:49 |
Terry Taylor
Messages: 113 Registered: October 2004 Location: San Lorenzo, CA
Karma: 0
|
Senior Member |
|
|
I had some time this weekend and borrowed a cover from a friends coach and
created a 3D drawing of it. Below is the link. I have some durability
testing to do on this part, but should be able to add them to my online
store in December or January.
https://dl.dropboxusercontent.com/u/14604450/20151109_084136.jpg
I DID print Dan's design and either there are two sizes of these things or
my software did not scale them properly, as his design is MUCH bigger than
mine
On Thu, Oct 29, 2015 at 7:16 AM, Len Novak wrote:
> I was thinking more of a plastic that had some give or spring to it.
>
> Len and Pat Novak
> 1978 GMC Kingsley
> The Beast II with dash lights that work and labels you can see!
> Fallbrook, CA new email: B52Rule@Roadrunner.Com
> http://www.gmcmhphotos.com/photos/showgallery.php?cat=4375
>
> www.bdub.net/novak/
>
>
>
>
> -----Original Message-----
> From: Gmclist [mailto:gmclist-bounces@list.gmcnet.org] On Behalf Of Terry
> Taylor
> Sent: Tuesday, October 27, 2015 5:35 PM
> To: gmclist@list.gmcnet.org
> Subject: Re: [GMCnet] 3D printed bunk latch cover
>
> On 10/27/2015 4:02 PM, Len Novak wrote:
> I have the bezel mostly modeled, the problem is that the retaining clip is
> stamped steel. Still working on ideas.
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
--
Terry Taylor
74 ex-Eleganza SE
San Lorenzo. CA
Merchandise Web Site: http://www.dldesignstore.com
Duct tape is like the force.....
It has a light side and a dark side and
It holds the galaxy together.
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
|
|
|
Re: [GMCnet] 3D printed bunk latch cover [message #290184 is a reply to message #290154] |
Tue, 10 November 2015 10:46 |
Dan
Messages: 99 Registered: August 2014 Location: Allentown, NJ
Karma: 0
|
Member |
|
|
Nice job! I imagine we ran into some scaling issues, I do not think there are more then one size.
Dan DeLuca
1978 Eleganza II (http://imgur.com/gallery/YFHhK)
Parked at Evil Monkey Farm in
Allentown, New Jersey
|
|
|