Engine goodies [message #262415] |
Sat, 20 September 2014 18:39 |
Chr$
Messages: 2690 Registered: January 2004 Location: Scottsdale, AZ
Karma: 1
|
Senior Member |
|
|
Remanufactured Carb $400 (Applied Reman costs $390 + core $180 = $670)SOLD
Used but good Rockwell Intake $400 They are $600 new - SOLD
45K Mile good 455 engine (was Ferguson's) Build-able or use as-is, is complete short block sans fuel and water pumps $200 pickup only Mesa AZ
Remanufactured J Heads, never installed (were Ferguson's) $300 pickup Mesa AZ, $480 Shipped lower 48
A good batch of stuff to build a spare motor. Make offer for whole lot.
Also:
3.07 Diffy - pulled working when changed to 3.21Sent to recycler
New Steering Box, variable ratio $350, and sell your core to Jim K. -SOLD
-Chr$: Perpetual SmartAss
Scottsdale, AZ
77 Ex-Kingsley 455 SOLD!
2010 Nomad 24 Ft TT 390W PV W/MPPT, EV4010 and custom cargo door.
Photosite: Chrisc GMC:"It has Begun" TT: "The Other Woman"
[Updated on: Sat, 24 January 2015 11:53] Report message to a moderator
|
|
|
Re: Engine goodies [message #262460 is a reply to message #262415] |
Sun, 21 September 2014 08:49 |
Joe Weir
Messages: 769 Registered: February 2013 Location: Columbia, SC
Karma: 7
|
Senior Member |
|
|
Chris,
If the steering box is not taken, I'm in.
76 Birchaven - "Wicked Mistress" - New engine, trans, alum radiator, brakes, Sully airbags, fuel lines, seats, adult beverage center... those Coachmen guys were really thinking about us second hand owners by including that beverage center...
Columbia, SC.
|
|
|
Re: Engine goodies [message #262467 is a reply to message #262415] |
Sun, 21 September 2014 11:00 |
Chr$
Messages: 2690 Registered: January 2004 Location: Scottsdale, AZ
Karma: 1
|
Senior Member |
|
|
Anyone going to Chippewa falls via Phoenix? I have a few items that are wanted...
-Chr$: Perpetual SmartAss
Scottsdale, AZ
77 Ex-Kingsley 455 SOLD!
2010 Nomad 24 Ft TT 390W PV W/MPPT, EV4010 and custom cargo door.
Photosite: Chrisc GMC:"It has Begun" TT: "The Other Woman"
|
|
|
Re: Engine goodies [message #269139 is a reply to message #262415] |
Wed, 07 January 2015 15:21 |
Chr$
Messages: 2690 Registered: January 2004 Location: Scottsdale, AZ
Karma: 1
|
Senior Member |
|
|
Bump.
Folks, Still have the engine, Heads, and Distributor (1977). The guy who bought my coach is putting a CAD500 in it. The engine I am selling is NOT the blown engine from my coach but a good take out that Steve Fergusen had.
The distributor is the original, worked fine, has a recent cap and newer wires, probably less than 1000 miles on those things.
J Heads - Correct for the GMC.
Fully and properly machined by reputable shop in San Diego with stellar reputation.
Block still has all rotating Assy (pistons, rods, crank,). Has 45K on it, I wouldn't bother rebuilding it.
I will ship it LTL freight to your house or a terminal near you. $450 for all of it including shipping in the lower 48.
I also have a 3.07 Diffy I took out when I got a 3.21. Still good also. $150 shipped LTL to anywhere in the lower 48.
-Chr$: Perpetual SmartAss
Scottsdale, AZ
77 Ex-Kingsley 455 SOLD!
2010 Nomad 24 Ft TT 390W PV W/MPPT, EV4010 and custom cargo door.
Photosite: Chrisc GMC:"It has Begun" TT: "The Other Woman"
|
|
|