GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMC Swap Meet » Cruise Control Part Needed (Plastic connector to carb.)
Cruise Control Part Needed [message #106455] Mon, 22 November 2010 12:48 Go to next message
MikeT   United States
Messages: 225
Registered: November 2009
Location: Marine City, Michigan
Karma: 0
Senior Member
Want to buy the small plastic piece that attaches the cruise control chain to the carb linkage. This is from a 403 if that matters.

Thanks


Mike Thomas Marine City, MI 77 ex Palm Beach

[Updated on: Mon, 22 November 2010 12:54]

Report message to a moderator

Re: Cruise Control Part Needed [message #106459 is a reply to message #106455] Mon, 22 November 2010 13:47 Go to previous message
Matt Colie is currently offline  Matt Colie   United States
Messages: 8547
Registered: March 2007
Location: S.E. Michigan
Karma: 7
Senior Member
MikeT wrote on Mon, 22 November 2010 13:48

Want to buy the small plastic piece that attaches the cruise control chain to the carb linkage. This is from a 403 if that matters.

Thanks

Mike,

Two things.
The stock GM cruise was used on all models for several decades. It can't be that hard to get.

I may be taking the OE cruise off my coach this winter and will have some parts available.

Matt


Matt & Mary Colie - Chaumière -'73 Glacier 23 - Members GMCMI, GMCGL, GMCES
Electronically Controlled Quiet Engine Cooling Fan with OE Rear Drum Brakes with Applied Control Arms
SE Michigan - Near DTW - Twixt A2 and Detroit
Previous Topic: ragusa step
Next Topic: 1977 23 Foot Birchaven $2000.00 36,718 original miles
Goto Forum:
  


Current Time: Sat Jun 01 12:36:48 CDT 2024

Total time taken to generate the page: 1.20957 seconds