GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.
Home » Public Forums » GMC Swap Meet » DINETTE TABLE BRACKET (DINETTE TABLE WALL HINGE)
DINETTE TABLE BRACKET [message #99994] Wed, 15 September 2010 22:46 Go to next message
SEWRIGHT333 is currently offline  SEWRIGHT333   Canada
Messages: 14
Registered: September 2008
Location: CANADA
Karma: 0
Junior Member
I am trying to locate the bracket that attaches
to the wall that holds the dinette table up
If anyone has one please email directly
or knows if they can be purchased from a store
SEWRIGHT33@YAHOO.COM
Thanks
Gary

[Updated on: Wed, 15 September 2010 22:47]

Report message to a moderator

Re: DINETTE TABLE BRACKET [message #100182 is a reply to message #99994] Fri, 17 September 2010 22:17 Go to previous messageGo to next message
Chr$ is currently offline  Chr$   United States
Messages: 2690
Registered: January 2004
Location: Scottsdale, AZ
Karma: 1
Senior Member
If you find two, send me one!!!

-Chr$: Perpetual SmartAss
Scottsdale, AZ

77 Ex-Kingsley 455 SOLD!
2010 Nomad 24 Ft TT 390W PV W/MPPT, EV4010 and custom cargo door.
Photosite: Chrisc GMC:"It has Begun" TT: "The Other Woman"

Report message to a moderator

Re: DINETTE TABLE BRACKET [message #100186 is a reply to message #99994] Fri, 17 September 2010 22:52 Go to previous messageGo to next message
Matt Colie is currently offline  Matt Colie   United States
Messages: 8547
Registered: March 2007
Location: S.E. Michigan
Karma: 7
Senior Member
SEWRIGHT333 wrote on Wed, 15 September 2010 23:46

I am trying to locate the bracket that attaches to the wall that holds the dinette table up If anyone has one please email directly
or knows if they can be purchased from a store SEWRIGHT33@YAHOO.COM
Thanks
Gary

Gary,

I came across this while looking for something else.
<http://www.dyersonline.com/tp-table-hinge-bracket-kit.html>
If you back out to:
<http://www.dyersonline.com/hardware/table/supports-brackets.html>
You will find that they also sell the individual parts.
I just am not sure which part is which by name.

Good Luck

Matt

Matt & Mary Colie - Chaumière -'73 Glacier 23 - Members GMCMI, GMCGL, GMCES
Electronically Controlled Quiet Engine Cooling Fan with OE Rear Drum Brakes with Applied Control Arms
SE Michigan - Near DTW - Twixt A2 and Detroit

Report message to a moderator

Re: DINETTE TABLE BRACKET [message #100200 is a reply to message #99994] Sat, 18 September 2010 06:26 Go to previous messageGo to next message
Larry is currently offline  Larry   United States
Messages: 2875
Registered: January 2004
Location: Menomonie, WI
Karma: 10
Senior Member
SEWRIGHT333 wrote on Wed, 15 September 2010 22:46

I am trying to locate the bracket that attaches
to the wall that holds the dinette table up
If anyone has one please email directly
or knows if they can be purchased from a store
SEWRIGHT33@YAHOO.COM
Thanks
Gary

Check with Michael Bozardt. I'd bet ya he's got them.

Larry Smile
78 Royale w/500 Caddy
Menomonie, WI.

Report message to a moderator

Re: DINETTE TABLE BRACKET [message #100926 is a reply to message #100186] Fri, 24 September 2010 23:41 Go to previous message
Chr$ is currently offline  Chr$   United States
Messages: 2690
Registered: January 2004
Location: Scottsdale, AZ
Karma: 1
Senior Member
Good stuff, Matt!

-Chr$: Perpetual SmartAss
Scottsdale, AZ

77 Ex-Kingsley 455 SOLD!
2010 Nomad 24 Ft TT 390W PV W/MPPT, EV4010 and custom cargo door.
Photosite: Chrisc GMC:"It has Begun" TT: "The Other Woman"

Report message to a moderator

Previous Topic: GMC Wheel Covers
Next Topic: Wanted: Battery compartment cover
Goto Forum:
  


Current Time: Mon May 20 01:52:40 CDT 2024

Total time taken to generate the page: 0.02468 seconds
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.1.
Copyright ©2001-2021 FUDforum Bulletin Board Software