| Re: [GMCnet] Removing the radiator in a 78 GMC. [message #329247 is a reply to message #329235] |
Sat, 17 February 2018 19:38   |
sgltrac
Messages: 2797
Registered: April 2011
Karma: 1
|
Senior Member |
|
|
If you mix the grade of stainless between the nuts and bolts they will not
gaul seize.
Sully
77 eleganza 2
Bellevue
On Sat, Feb 17, 2018 at 12:04 PM RICHARD/MARLI SHOOP
wrote:
> Carl:
> Any time you use stainless fasteners be sure to use anti seize
> compound. The stainless has a characteristic of 'cold welding' itself
> together. Most noticeable when the connection is stainless to stainless,
> but also there with stainless to aluminum. Also, stainless hardware is MUCH
> weaker than the same size steel fastener. Rick Shoop
>
>> On February 17, 2018 at 8:00 AM Carl Stouffer
> wrote:
>>
>>
>> I used stainless steel bolts and welded the heads to the angle iron
> bracket. I also used SS nuts and lock washers on the bottom. I took the
> radiator
>> out a few weeks ago to make pulling the engine easier and the hardware
> was still tight but easy to remove.
>> --
>> Carl Stouffer
>> '75 ex Palm Beach
>> Tucson, AZ.
>> Chuck Aulgur Reaction Arm Disc Brakes, Quadrabags, 3.70 LSD final drive,
> Lenzi knuckles/hubs, Dodge Truck 16" X 8" front wheels, Rear American
> Eagles,
>> Solar battery charging. GMCSJ and GMCMI member
>>
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Sully
77 Royale basket case.
Future motorhome land speed record holder(bucket list)
Seattle, Wa.
|
|
|
|
| Re: [GMCnet] Removing the radiator in a 78 GMC. [message #329256 is a reply to message #329228] |
Sun, 18 February 2018 04:41 |
Ken Burton
Messages: 10030
Registered: January 2004
Location: Hebron, Indiana
Karma: 10
|
Senior Member |
|
|
Ken Henderson wrote on Sat, 17 February 2018 09:26Hmmmpf -- use Captive nuts on the top so you don't have to try to put two
hands where only one will fit -- like on my split fan shroud. 
(You can still use a telescope.)
Ken H.
On Sat, Feb 17, 2018 at 10:15 AM, James Hupy wrote:
> So, bolts in from the bottom? You make a valid point, Johnny. I guess, it
> should not make any difference in clamping. Should help on the visual
The manufacturer of my split radiator shroud put the captive nuts on the bottom so the bolts went in from the top. What a PIA that is. They changed it on later ones.
Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
