Re: Aluminum T Skirts [message #201661 is a reply to message #201448] |
Thu, 14 March 2013 11:26 |
|
John Heslinga
Messages: 632 Registered: February 2011 Location: Edmonton, Alberta, Canada
Karma: 4
|
Senior Member |
|
|
Kerry:
Thanks for the explanation on how too shrink the metal. I made my first piece of junk trying what I thought I understood was the process. I tried making dimples and crimping the flange and the small panel did start to move the right way. That seems to do an effective job of the panel. However the flange looks a mess. I obviously have a lot more practice to do. I will have to work beside a master such as yourself to get the finer skills this needs. I've bookmarked the metal working site and will spend some more time researching and practicing what I learn.
Thanks again!!
John and Cathie Heslinga
1974 Canyonlands 260
455, Manny tranny and 1 ton, 3:70 LS,
Red Seal Journeyman, DTE, BEd. MEd.
Edmonton, Alberta
|
|
|