[GMCnet] Re; Marker Light Wiring [message #77310] |
Sat, 20 March 2010 02:00 |
Richard Brown
Messages: 281 Registered: May 2009
Karma: 1
|
Senior Member |
|
|
I had the same problem when I cleaned up the corrosion on mine. There was a connector behind the driver's side speaker above the headliner that had come loose. Not sure it was stock, but it was there. I used oven cleaner followed by a squirt bottle rinse. I used paper towels to catch any liquid. I then put a thin layer of petroleum jelly on the connections, as well as inside the sockets where the bulb contacted. So far, so good.
Richard & Carol Brown
PO Box 941
Lindale, TX. 75771
1974 GMC Eleganza SE
wings77sporty@sbcglobal.net
(903)881-0192
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Richard & Carol Brown
1974 Eleganza SE
1174 Hickory Hills Dr.
Murchison, TX. 75778
|
|
|