Home » Public Forums » GMCnet » [GMCnet] Trading my GMC for a pup tent.
[GMCnet] Trading my GMC for a pup tent. [message #318022] |
Thu, 25 May 2017 22:15 |
BobDunahugh
Messages: 2465 Registered: October 2010 Location: Cedar Rapids, IA
Karma: 11
|
Senior Member |
|
|
But Ken H, and Emery came to the rescue. Thanks to you both. The isolator died a sudden death. And the PO had put a manual isolation switch that I had messed with. Next the main battery wasn't all that it could be. Then the fusible link that I didn't see, or know of. Ignorance is NOT bliss. Just extremely frustrating. Bob Dunahugh Member GMCMI.
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
|
|
|
|
|
|
|
|
Re: [GMCnet] Trading my GMC for a pup tent. [message #318061 is a reply to message #318060] |
Sat, 27 May 2017 14:31 |
James Hupy
Messages: 6806 Registered: May 2010
Karma: -62
|
Senior Member |
|
|
Bob, could it possibly be that you MIGHT BE just a wee bit hypervigilant
about matters of fire safety. I know, I am, and it is not even my coach. I
can truly understand your position. I sympathize with you. But, I've slept
in pup tents. They suck. Dome tents with a rip stop nylon rain fly covering
the drip line are waaaaay better. What the homeless guys out our way all
use. Hang in there.
Jim Hupy
Salem, Or
78 GMC ROYALE 403
On May 27, 2017 12:19 PM, "Bob Dunahugh" wrote:
> It just has got so frustrating after all the labor invested in getting
> this GMC so perfect for Linda, and myself. I need to keep in mined that
> our GMC sat next to a corn field in Iowa for 20 years. That raises havoc
> with electrical parts. I knew that. And expected the issue. I'm just at
> my burn out level at this time. We've hit 2 Raccoons, and 1 pig. The
> mufflers get even small dents. Next the harmonics break up the outside
> case. Or the inside baffles due to the dents. Flow master had the patent
> run out on their 40 series muffler . So now you can get that type of all
> welded muffler for $60. I take the new mufflers home. Only to find out that
> one of the mufflers has the wrong size inlet. Now the shop is closed till
> Tuesday. It's a HOBBY. RIGHT? Bob Dunahugh
>
>
> ________________________________
> From: Bob Dunahugh
> Sent: Thursday, May 25, 2017 10:15 PM
> To: gmclist@list.gmcnet.org
> Subject: Trading my GMC for a pup tent.
>
>
> But Ken H, and Emery came to the rescue. Thanks to you both. The isolator
> died a sudden death. And the PO had put a manual isolation switch that I
> had messed with. Next the main battery wasn't all that it could be. Then
> the fusible link that I didn't see, or know of. Ignorance is NOT bliss.
> Just extremely frustrating. Bob Dunahugh Member GMCMI.
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
|
|
|
Re: [GMCnet] Trading my GMC for a pup tent. [message #318064 is a reply to message #318061] |
Sat, 27 May 2017 14:43 |
Jeanette
Messages: 118 Registered: May 2013
Karma: 0
|
Senior Member |
|
|
Take a break Bob to replenish your energy n love for your GMC. Work on the necessities n get out to enjoy all your perfection work!
Sent from my iPhone
> On May 27, 2017, at 2:31 PM, James Hupy wrote:
>
> Bob, could it possibly be that you MIGHT BE just a wee bit hypervigilant
> about matters of fire safety. I know, I am, and it is not even my coach. I
> can truly understand your position. I sympathize with you. But, I've slept
> in pup tents. They suck. Dome tents with a rip stop nylon rain fly covering
> the drip line are waaaaay better. What the homeless guys out our way all
> use. Hang in there.
> Jim Hupy
> Salem, Or
> 78 GMC ROYALE 403
>
>> On May 27, 2017 12:19 PM, "Bob Dunahugh" wrote:
>>
>> It just has got so frustrating after all the labor invested in getting
>> this GMC so perfect for Linda, and myself. I need to keep in mined that
>> our GMC sat next to a corn field in Iowa for 20 years. That raises havoc
>> with electrical parts. I knew that. And expected the issue. I'm just at
>> my burn out level at this time. We've hit 2 Raccoons, and 1 pig. The
>> mufflers get even small dents. Next the harmonics break up the outside
>> case. Or the inside baffles due to the dents. Flow master had the patent
>> run out on their 40 series muffler . So now you can get that type of all
>> welded muffler for $60. I take the new mufflers home. Only to find out that
>> one of the mufflers has the wrong size inlet. Now the shop is closed till
>> Tuesday. It's a HOBBY. RIGHT? Bob Dunahugh
>>
>>
>> ________________________________
>> From: Bob Dunahugh
>> Sent: Thursday, May 25, 2017 10:15 PM
>> To: gmclist@list.gmcnet.org
>> Subject: Trading my GMC for a pup tent.
>>
>>
>> But Ken H, and Emery came to the rescue. Thanks to you both. The isolator
>> died a sudden death. And the PO had put a manual isolation switch that I
>> had messed with. Next the main battery wasn't all that it could be. Then
>> the fusible link that I didn't see, or know of. Ignorance is NOT bliss.
>> Just extremely frustrating. Bob Dunahugh Member GMCMI.
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
|
|
|
Re: [GMCnet] Trading my GMC for a pup tent. [message #318087 is a reply to message #318022] |
Sat, 27 May 2017 22:59 |
Carl S.
Messages: 4186 Registered: January 2009 Location: Tucson, AZ.
Karma: 13
|
Senior Member |
|
|
My first long motorhome trip was in an '78 Dodge chassis Mobile Traveler, class-C that my dad had just acquired about a week earlier. We traveled from Tucson, AZ to Prince Rupert, BC, on the way to visit my sister in Wrangell, AK. in late Summer of 1982. The motorhome had been sitting for a time, unused. It obviously wasn't a LONG time, as it was only five years old, but I had to fix something every night on the trip north, due to mostly corroded electrical connections. I can only imagine how bad some of that stuff in on a GMC that has been sitting idle for years and years.
Carl Stouffer
'75 ex Palm Beach
Tucson, AZ.
Chuck Aulgur Reaction Arm Disc Brakes, Quadrabags, 3.70 LSD final drive, Lenzi knuckles/hubs, Dodge Truck 16" X 8" front wheels, Rear American Eagles, Solar battery charging. GMCSJ and GMCMI member
|
|
|
Re: [GMCnet] Trading my GMC for a pup tent. [message #318088 is a reply to message #318060] |
Sun, 28 May 2017 02:03 |
Guy Lopes
Messages: 499 Registered: April 2004 Location: Sacramento, CA
Karma: 3
|
Senior Member |
|
|
Bob,
Please don't throw in the towel! You are a true inspiration to many of us
and I, for one, marvel at all that you've done with your latest project.
I hope to give you a call within the next couple of weeks for some advice
and guidance.
Guy Lopes
75 Birchaven
Sacramento, CA
-----Original Message-----
From: Gmclist [mailto:gmclist-bounces@list.gmcnet.org] On Behalf Of Bob
Dunahugh
Sent: Saturday, May 27, 2017 12:19 PM
To: gmclist@list.gmcnet.org
Subject: Re: [GMCnet] Trading my GMC for a pup tent.
It just has got so frustrating after all the labor invested in getting this
GMC so perfect for Linda, and myself. I need to keep in mined that our GMC
sat next to a corn field in Iowa for 20 years. That raises havoc with
electrical parts. I knew that. And expected the issue. I'm just at my burn
out level at this time. We've hit 2 Raccoons, and 1 pig. The mufflers get
even small dents. Next the harmonics break up the outside case. Or the
inside baffles due to the dents. Flow master had the patent run out on their
40 series muffler . So now you can get that type of all welded muffler for
$60. I take the new mufflers home. Only to find out that one of the mufflers
has the wrong size inlet. Now the shop is closed till Tuesday. It's a HOBBY.
RIGHT? Bob Dunahugh
________________________________
From: Bob Dunahugh
Sent: Thursday, May 25, 2017 10:15 PM
To: gmclist@list.gmcnet.org
Subject: Trading my GMC for a pup tent.
But Ken H, and Emery came to the rescue. Thanks to you both. The isolator
died a sudden death. And the PO had put a manual isolation switch that I had
messed with. Next the main battery wasn't all that it could be. Then the
fusible link that I didn't see, or know of. Ignorance is NOT bliss. Just
extremely frustrating. Bob Dunahugh Member GMCMI.
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Guy Lopes
76 Birchaven "Orion"
Sacramento, CA
W6TOL
www.GMC-Guy.com
|
|
|
Goto Forum:
Current Time: Tue May 07 18:47:40 CDT 2024
Total time taken to generate the page: 0.01449 seconds
|