GMCforum: GMCnet » [GMCnet] Pulling the 6000w Owan. Are you kiding me. Just 8 -1/4 inch bolts.

Home » Public Forums » GMCnet » [GMCnet] Pulling the 6000w Owan. Are you kiding me. Just 8 -1/4 inch bolts.

Show: Today's Messages :: Polls :: Message Navigator

[GMCnet] Pulling the 6000w Owan. Are you kiding me. Just 8 -1/4 inch bolts. [message #310056]

Mon, 07 November 2016 19:05

BobDunahugh

Messages: 2465
Registered: October 2010
Location: Cedar Rapids, IA

Karma: 11

Senior Member

Yes. The wiring, and fuel line. But it's just those 4-1/4 inch bolts on each side of the slid track. Something is just wrong. It can't be that simple.

Bob Dunahugh
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

Report message to a moderator

Re: [GMCnet] Pulling the 6000w Owan. Are you kiding me. Just 8 -1/4 inch bolts. [message #310058 is a reply to message #310056]

Mon, 07 November 2016 19:41

tphipps

Messages: 3005
Registered: August 2004
Location: Spanish Fort, AL

Karma: 9

Senior Member

Yep, it is.
Tom, MS II

2012 Phoenix Cruiser model 2552 KA4CSG

Report message to a moderator

Re: [GMCnet] Pulling the 6000w Owan. Are you kiding me. Just 8 -1/4 inch bolts. [message #310065 is a reply to message #310056]

Mon, 07 November 2016 22:35

JohnL455

Messages: 4447
Registered: October 2006
Location: Woodstock, IL

Karma: 12

Senior Member

Yep. Just put some tension on the eyebolt with the engine hoist and start removing them. Bob are you at MCACN show this year?

John Lebetski
Woodstock, IL
77 Eleganza II

Report message to a moderator

Re: [GMCnet] Pulling the 6000w Owan. Are you kiding me. Just 8 -1/4 inch bolts. [message #310066 is a reply to message #310056]

Mon, 07 November 2016 22:39

JohnL455

Messages: 4447
Registered: October 2006
Location: Woodstock, IL

Karma: 12

Senior Member

Yep. Just put some tension on the eyebolt with the engine hoist and start removing them. Bob are you at MCACN show this year?

John Lebetski
Woodstock, IL
77 Eleganza II

Report message to a moderator

Re: [GMCnet] Pulling the 6000w Owan. Are you kiding me. Just 8 -1/4 inch bolts. [message #310077 is a reply to message #310056]

Tue, 08 November 2016 08:50

Chris Tyler

Messages: 458
Registered: September 2013
Location: Odessa FL

Karma: 7

Senior Member

I always loved the 'works in the drawer' Onans.
Most SOBs did not have them. A few had swing down mounts which made service and removal easier, but you couldn't run them tilted
ours are much easier to work on.

Speaking of which, helped a friend tear down an oman Marquis 7.0 that was locked up. FAR more involved. Plenty of FU bolts.
turned out to be the pulley end motor bearing fragged.

76 Glenbrook

Report message to a moderator

Re: [GMCnet] Pulling the 6000w Owan. Are you kiding me. Just 8 -1/4 inch bolts. [message #310086 is a reply to message #310056]

Tue, 08 November 2016 10:30

SeanKidd

Messages: 747
Registered: June 2012
Location: Northern Neck Virginia

Karma: 4

Senior Member

That's why I repurposed my drawer for my Honda inverter...
http://www.gmcmhphotos.com/photos/data/6884/medium/DSC044571.JPG

Sean and Stephanie
73 Ex-CanyonLands 26' #317 "Oliver"
Hubler 1-Ton, Quad-Bags, Rear Disc, Reaction Arms, P.Huber TBs, 3.70:1 LSD Honda 6500 inverter gen.
Colonial Travelers

Report message to a moderator

Previous Topic:	Norcold refrigerator install
Next Topic:	[GMCnet] 3 Ton Jack

Goto Forum:

-=] Back to Top [=-

Current Time: Fri Apr 26 02:11:26 CDT 2024

Total time taken to generate the page: 0.02241 seconds