GMCforum: GMCnet » [GMCnet] The new Torsion Bar and update

Home » Public Forums » GMCnet » [GMCnet] The new Torsion Bar and update

Show: Today's Messages :: Polls :: Message Navigator

[GMCnet] The new Torsion Bar and update [message #262077]

Tue, 16 September 2014 16:17

p.huber

Messages: 73
Registered: June 2012
Location: Oakland

Karma: 3

Member

I have received quite a few commitments from my GMC friends to purchase the
new Torsion Bar set. However I could not come up to the value of 40 sets as
of today. If any of you are still interested to commit to a set of new,
stronger Torsion bars I might be able to negotiate with the manufacturer a
deal with lower amounts of production for the same price. The price will be
$ 800.00 plus shipping cost.

I had nothing but good satisfactory replies who bought the previous 30 set
of T.Bs.

The present T.B. will be the same as before, stronger by 19% and the hex
will be extended 1" per Ken Henderson's recommendation..

There will be no sales tax, since Jim Hupy will take over and drop ship out
of Oregon.

If you want a set of new Torsion Bars let me know now. Contact me directly
for your commitment on or before October 10, 2014.

I will participate at the GMCWS Fall Rally in Manteca, CA (Oct. 1-6, 2014)
And you can also talk to me regarding the new stronger Torsion Bars.

This will be my the final attempt to round up GMC friends with Torsion Bar
problems, I am getting old, have a schedule for a total knee replacement and
other health issues.

Greeting to all you great GMCers.

Best regards

Peter D. Huber

GMC Royale 1978 403

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

Re: [GMCnet] The new Torsion Bar and update [message #262093 is a reply to message #262077]

Tue, 16 September 2014 19:38

JShot

Messages: 485
Registered: October 2006
Location: NW Ohio

Karma: 0

Senior Member

Peter,
Do you, or anyone, have the shipping weight for the bars? If this is known, prospective buyers could estimate their total cost for a set (inc me).

Thanks,
John

John Shotwell
Ridgeville Corners, OH
78 Royale Center Kitchen

Report message to a moderator

Re: [GMCnet] The new Torsion Bar and update [message #262095 is a reply to message #262093]

Tue, 16 September 2014 19:59

jhb1

Messages: 303
Registered: February 2004

Karma: 0

Senior Member

It cost me about 110$ to have mine shipped from California to upstate New York for the last set that has to be the close to the farthest. When I say upstate NY I mean 40 miles from Montreal Canada

John H. Bell
77 Royale; QuadBag,Manny OneTon,Honda EV4010, FITech
Montreal Qc.

Report message to a moderator

Previous Topic:	[GMCnet] Manny Travao has a wonderful one ton front end and I have new torsion bars!
Next Topic:	Carrier Low Profile available

Goto Forum:

-=] Back to Top [=-

Current Time: Fri May 17 05:30:12 CDT 2024

Total time taken to generate the page: 0.02589 seconds