GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Installing Sullybuilt airbag system.
Installing Sullybuilt airbag system. [message #162804] Mon, 12 March 2012 21:26 Go to next message
mgrue is currently offline  mgrue   United States
Messages: 192
Registered: October 2010
Location: Valmeyer IL
Karma: 0
Senior Member
I have just completed installing my new Sullybuilt airbag mounting plates. I replaced the original plates I designed. The Sullybuilt plates are well designed and install easily.

http://www.gmcmhphotos.com/photos/showgallery.php?cat=6036

Mark


Mark Grueninger 76 Palm Beach Valmeyer IL
Re: Installing Sullybuilt airbag system. [message #162819 is a reply to message #162804] Mon, 12 March 2012 22:23 Go to previous messageGo to next message
RadioActiveGMC is currently offline  RadioActiveGMC   United States
Messages: 1020
Registered: November 2010
Location: Hot AZ desert
Karma: 0
Senior Member
Nice photos! I really appreciate the effort of pics like that. How long did the install take? And what have you felt about ride quality?

***"Gettin There"-1973 23' Sequoia- Michael, Onans smell, "Go solar/wind power!"
Re: Installing Sullybuilt airbag system. [message #162839 is a reply to message #162819] Tue, 13 March 2012 05:59 Go to previous message
mgrue is currently offline  mgrue   United States
Messages: 192
Registered: October 2010
Location: Valmeyer IL
Karma: 0
Senior Member
It took about 45 min on the first side and about 20 min on the second side. I do not have the T skirts on my coach though. One of the original bags blew up and destroyed one. I have not put them back on as I need to get a replacement. I did not notice a lot of difference in ride from the OEM bags. Maybe a bit firmer but hard to say, even when I had an oem on the right and a new bag on the left.

Mark

Mr.RadioActive wrote on Mon, 12 March 2012 22:23

Nice photos! I really appreciate the effort of pics like that. How long did the install take? And what have you felt about ride quality?



Mark Grueninger 76 Palm Beach Valmeyer IL
Previous Topic: [GMCnet] 502 GM roller crate motor
Next Topic: [GMCnet] RockAuto 5% Discount
Goto Forum:
  


Current Time: Sun May 05 07:31:16 CDT 2024

Total time taken to generate the page: 0.02164 seconds