GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » [GMCnet] Old GMC rims
[GMCnet] Old GMC rims [message #62074] Wed, 28 October 2009 10:17 Go to next message
Terry Skinner is currently offline  Terry Skinner   United States
Messages: 379
Registered: January 2004
Karma: 0
Senior Member
Twice my mail box has been run down by drunks so I fabricated a new
one out of 3/16" steel plate and welded it on a 6" steel pipe and
welded the pipe to a GMC rim. Last night the Sheriff stopped in to
give me my mail. Seems that someone hit the mailbox again. They didn't
make it too far because the rim was rolled up under the vehicle and
punched a hole in the oil pan evidenced by the trail of oil leading
away from the mail box. I love it!! Going to spend this morning
fabricating another.<VBG>.............Terry

--
Terry Skinner
Roy. Washington
'76 GMC
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Re: [GMCnet] Old GMC rims [message #62078 is a reply to message #62074] Wed, 28 October 2009 10:37 Go to previous messageGo to next message
Little Yimmy is currently offline  Little Yimmy   United States
Messages: 144
Registered: February 2004
Location: Roseville, MN
Karma: 0
Senior Member

Our solution, at the cabin...

55 gallon drum, buried flush in the ground.
6 inch pipe, drum depth plus proper mailbox height with 3/8 inch box mounting plate with pour hole in center welded to top.
fill drum and pipe (thru pour hole) with concrete.

Why, you ask. Post also doubles as a gate post which the locals, who don't want us there, kept destroying or pulling out of the ground and carrying away. Not anymore.


Little Yimmy - W9VUA
75 PB - F260206
Twin Cities, MN
Re: [GMCnet] Old GMC rims [message #62112 is a reply to message #62074] Wed, 28 October 2009 13:15 Go to previous messageGo to next message
KB is currently offline  KB   United States
Messages: 1262
Registered: September 2009
Karma: 0
Senior Member
So *that's* what I can do with my big pile of old rims.
I was wondering what to do with them... :-)

Karen


> From: Terry Skinner <gmcnut@gmail.com>
>
> Twice my mail box has been run down by drunks so I fabricated a new
> one out of 3/16" steel plate and welded it on a 6" steel pipe and
> welded the pipe to a GMC rim. Last night the Sheriff stopped in to
> give me my mail. Seems that someone hit the mailbox again. They didn't
> make it too far because the rim was rolled up under the vehicle and
> punched a hole in the oil pan evidenced by the trail of oil leading
> away from the mail box. I love it!! Going to spend this morning
> fabricating another.<VBG>.............Terry

_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist



Karen 1975 26' San Jose, CA
Re: [GMCnet] Old GMC rims [message #62118 is a reply to message #62112] Wed, 28 October 2009 13:37 Go to previous messageGo to next message
storm'n is currently offline  storm'n   United States
Messages: 492
Registered: April 2007
Location: Ont. Can
Karma: 0
Senior Member
Sounds like CSI were the mail box owner filled it with cement & when the vandals hit it with a base ball bat he had his arm broken.

--- On Wed, 10/28/09, KB <kab7@sonic.net> wrote:


From: KB <kab7@sonic.net>
Subject: Re: [GMCnet] Old GMC rims
To: gmclist@temp.gmcnet.org
Received: Wednesday, October 28, 2009, 2:15 PM


So *that's* what I can do with my big pile of old rims.
I was wondering what to do with them... :-)

Karen


> From: Terry Skinner <gmcnut@gmail.com>
>
> Twice my mail box has been run down by drunks so I fabricated a new
> one out of 3/16" steel plate and welded it on a 6" steel pipe and
> welded the pipe to a GMC rim. Last night the Sheriff stopped in to
> give me my mail. Seems that someone hit the mailbox again. They didn't
> make it too far because the rim was rolled up under the vehicle and
> punched a hole in the oil pan evidenced by the trail of oil leading
> away from the mail box. I love it!! Going to spend this morning
> fabricating another.<VBG>.............Terry

_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Re: [GMCnet] Old GMC rims [message #62122 is a reply to message #62118] Wed, 28 October 2009 13:54 Go to previous messageGo to next message
Harry is currently offline  Harry   Canada
Messages: 1888
Registered: October 2007
Location: Victoria, BC CANADA
Karma: 3
Senior Member
My son made a heavy duty mailbox and the Hiway Dept removed it.
"It would damage the snow plow", he was told.
Re: [GMCnet] Old GMC rims [message #62155 is a reply to message #62122] Wed, 28 October 2009 16:40 Go to previous messageGo to next message
Terry Skinner is currently offline  Terry Skinner   United States
Messages: 379
Registered: January 2004
Karma: 0
Senior Member
That is why the rim just sits on top of the ground. My intention was
that if it was hit again they would just knock it aside and I could
roll it back into place. Evedently it was pretty well stuck under the
car (truck?) and was drug three blocks before it punctured the
transmission oil pan and spilled oil for 6 more blocks. Only thing I
can figure is they must of had a friend come tow them home. I went up
and down the streets and couldn't find him............Terry

On Wed, Oct 28, 2009 at 11:54 AM, David H. Jarvis <jarvis210@shaw.ca> wrote:
>
>
> My son made a heavy duty mailbox and the Hiway Dept removed it.
> "It would damage the snow plow", he was told.
> --
> "I've always been crazy, but it kept me from going insane"
> _______________________________________________
> GMCnet mailing list
> List Information and Subscription Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>



--
Terry Skinner
Roy. Washington
'76 GMC
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Re: [GMCnet] Old GMC rims [message #62170 is a reply to message #62118] Wed, 28 October 2009 17:57 Go to previous messageGo to next message
GMCWiperMan is currently offline  GMCWiperMan   United States
Messages: 1248
Registered: December 2007
Karma: 1
Senior Member
Unfortunately, in these "Politically Correct" days, many states have
laws against such defensive tactics. When SHE wanted a brick mailbox I
looked into the relevant ordinances. I was shocked by the
restrictions. I don't recall them now, but they included such things as
limitations on the size of the post, etc,. intended to prevent damage TO
THE VANDALS. :-(

In fact, I think they specifically excluded the type I like best: a
heavy steel box mounted on an arm from a heavy steel post, arranged so
that the arm always swings back to the correct position even after being
hit (and perhaps swinging all the way around to attack the striker from
the rear).

Don't get yourself successfully sued. From Terry's experience with the
sheriff, apparent that's not a problem in WA. Congratulations!

Ken H.

Norm Bowker wrote:
> Sounds like CSI were the mail box owner filled it with cement & when the vandals hit it with a base ball bat he had his arm broken.
>
> --- On Wed, 10/28/09, KB <kab7@sonic.net> wrote:
>
>
> From: KB <kab7@sonic.net>
> So *that's* what I can do with my big pile of old rims.
> I was wondering what to do with them... :-)
>
> Karen
>
>
>> From: Terry Skinner <gmcnut@gmail.com>
>>
>> Twice my mail box has been run down by drunks so I fabricated a new
>> one out of 3/16" steel plate and welded it on a 6" steel pipe and
>> welded the pipe to a GMC rim. Last night the Sheriff stopped in to
>> give me my mail. Seems that someone hit the mailbox again. They didn't
>> make it too far because the rim was rolled up under the vehicle and
>> punched a hole in the oil pan evidenced by the trail of oil leading
>> away from the mail box. I love it!! Going to spend this morning
>> fabricating another.<VBG>.............Terry
>>

_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Re: [GMCnet] Old GMC rims [message #62176 is a reply to message #62170] Wed, 28 October 2009 18:29 Go to previous messageGo to next message
corunnadon is currently offline  corunnadon   United States
Messages: 18
Registered: February 2004
Location: Cournna, Michigan
Karma: 0
Junior Member

In Michigan that a big problem, lawsuits. In this county when the speed
limit is over 35 miles you are restricted to how heavy a structure you can
have to hold your mailbox as it might hurt someone running into it, also if
the snow plow.

Don

_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist



Don Hart
Corunna, MI
75-76 Glenbrook
Re: [GMCnet] Old GMC rims [message #62200 is a reply to message #62176] Wed, 28 October 2009 20:19 Go to previous messageGo to next message
Little Yimmy is currently offline  Little Yimmy   United States
Messages: 144
Registered: February 2004
Location: Roseville, MN
Karma: 0
Senior Member

corunnadon wrote on Wed, 28 October 2009 18:29

In Michigan that a big problem, lawsuits. In this county when the speed
limit is over 35 miles you are restricted to how heavy a structure you can
have to hold your mailbox as it might hurt someone running into it,

Not a problem. We are at the end of the public road. Anyone doing over 25 mph will go thru the barricade at the end of the road and end up in an 80 foot deep ravine, which all the locals know about. Also, since it is a minimum maintenance road, anyone driving over 25 mph is really punishing their vehicle, not to mention themselves.
Quote:


also if
the snow plow.


The road is not plowed in the winter. Snowmobile, skis or snow shoes are the only way to the end of the road.


Little Yimmy - W9VUA
75 PB - F260206
Twin Cities, MN
Re: [GMCnet] Old GMC rims [message #62246 is a reply to message #62074] Thu, 29 October 2009 00:07 Go to previous messageGo to next message
Ken Burton is currently offline  Ken Burton   United States
Messages: 10030
Registered: January 2004
Location: Hebron, Indiana
Karma: 10
Senior Member
I had a drunk run off the road and hit one of my trees. The sheriff left the vehicle in place until morning. They call me in the morning and asked me if I wanted to keep the vehicle or if they should have it towed away.

I did not have much use for a smashed up Buick so I let them tow it.


Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana
Re: [GMCnet] Old GMC rims [message #62257 is a reply to message #62246] Thu, 29 October 2009 03:50 Go to previous message
USAussie is currently offline  USAussie   United States
Messages: 15912
Registered: July 2007
Location: Sydney, Australia
Karma: 6
Senior Member
Ken,

Too bad the drunk wasn't driving a Toronado eh?

Regards,
Rob Mueller
Sydney, Australia
AUS '75 Avion-The Blue Streak TZE365V100428
USA '75 Avion-Double Trouble TZE365V100426

-----Original Message-----
On Behalf Of Ken Burton

I had a drunk run off the road and hit one of my trees. The sheriff left
the vehicle in place until morning. They call me in the morning and asked
me if I wanted to keep the vehicle or if they should have it towed away.

I did not have much use for a smashed up Buick so I let them tow it.
--
Ken

_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist



Regards, Rob M. (USAussie) The Pedantic Mechanic Sydney, Australia '75 Avion - AUS - The Blue Streak TZE365V100428 '75 Avion - USA - Double Trouble TZE365V100426
Previous Topic: [GMCnet] Various Engine Dimensions
Next Topic: [GMCnet] Palm Beach Paint Color
Goto Forum:
  


Current Time: Thu May 16 23:12:19 CDT 2024

Total time taken to generate the page: 0.01214 seconds