Re: Question for a "friend" [message #362887 is a reply to message #362884] |
Wed, 17 March 2021 08:24 |
JohnL455
Messages: 4447 Registered: October 2006 Location: Woodstock, IL
Karma:
|
Senior Member |
|
|
Muffler bearing is a slang term (usually regarding a shop charging an unsuspecting customer for a mythical part) However on the GMC they have taken on the meaning of the silicone rubber isolators that the long 2 1/2” pipes pass through to keep them from rubbing the frame. The rubber grommet is GM 712307 and the bracket is GM 712306. 2 sets are used along the pipe.
The part you need is the SEAL- manifold or GM 387897. These are 2 1/4” and available from Felpro (Federal Mogul) or Nickson exhaust parts. I have had longer lasting results with the Nickson. The Felpro have a blue coating and the Nickson are a natural graphite finish on the sealing ring.
John Lebetski
Woodstock, IL
77 Eleganza II
|
|
|