Home » Public Forums » GMCnet » OEM intake manifolds and cracks, symptoms?
Re: [GMCnet] OEM intake manifolds and cracks, symptoms? [message #335679 is a reply to message #335676] |
Thu, 26 July 2018 18:00 |
James Hupy
Messages: 6806 Registered: May 2010
Karma:
|
Senior Member |
|
|
Don't know if that aluminum pour is necessary, but it should work,
particularly if the block off plates are used. It can't hurt anything. Some
people, the money to pour the aluminum is no big deal, yet, some would
resist that expenditure like having their wisdom teeth pulled. Each his
own, I say.
Jim Hupy
Salem, OREGON
78 GMC ROYALE 403
On Thu, Jul 26, 2018, 3:35 PM Larry wrote:
> Don't know if anyone has mentioned this yet, but here goes.
>
> Take your manifold to your nearest foundry. Put a block-off plate on one
> or the other crossover ports and have them pour it full of aluminum. See
> this:
>
> http://www.gmcmhphotos.com/photos/g4571-pouring-the-455-crossover.html
>
> It did two things. Blocked the crossover, and even though the manifold did
> not cracks, it would seal manifold cracks. Think I paid $25 or so. Still
> put the SS plates on the ports to keep exhaust gasses from reaching the
> aluminum. Didn't think it would be a problem, but did it anyway as a safety
> measure. JWID
> --
> Larry
> 78 Royale w/500 Caddy
> Menomonie, WI.
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
|
|
|
|
|
OEM intake manifolds and cracks, symptoms?
By: GMC2000 on Mon, 23 July 2018 00:34
|
|
|
Re: OEM intake manifolds and cracks, symptoms?
|
|
|
Re: [GMCnet] OEM intake manifolds and cracks, symptoms?
|
|
|
Re: OEM intake manifolds and cracks, symptoms?
|
|
|
Re: [GMCnet] OEM intake manifolds and cracks, symptoms?
|
|
|
Re: OEM intake manifolds and cracks, symptoms?
By: GMC2000 on Mon, 23 July 2018 22:26
|
|
|
Re: OEM intake manifolds and cracks, symptoms?
By: pjburt on Mon, 23 July 2018 23:15
|
|
|
Re: OEM intake manifolds and cracks, symptoms?
By: GMC2000 on Wed, 25 July 2018 00:43
|
|
|
Re: OEM intake manifolds and cracks, symptoms?
|
|
|
Re: [GMCnet] OEM intake manifolds and cracks, symptoms?
By: jimk on Wed, 25 July 2018 08:49
|
|
|
Re: [GMCnet] OEM intake manifolds and cracks, symptoms?
By: sgltrac on Wed, 25 July 2018 12:54
|
|
|
Re: [GMCnet] OEM intake manifolds and cracks, symptoms?
By: jimk on Wed, 25 July 2018 13:36
|
|
|
Re: [GMCnet] OEM intake manifolds and cracks, symptoms?
By: sgltrac on Wed, 25 July 2018 14:23
|
|
|
Re: [GMCnet] OEM intake manifolds and cracks, symptoms?
By: jimk on Wed, 25 July 2018 15:37
|
|
|
Re: OEM intake manifolds and cracks, symptoms?
|
|
|
Re: [GMCnet] OEM intake manifolds and cracks, symptoms?
By: jimk on Thu, 26 July 2018 09:32
|
|
|
Re: OEM intake manifolds and cracks, symptoms?
By: Larry on Thu, 26 July 2018 17:34
|
|
|
Re: [GMCnet] OEM intake manifolds and cracks, symptoms?
|
|
|
Re: [GMCnet] OEM intake manifolds and cracks, symptoms?
|
|
|
Re: [GMCnet] OEM intake manifolds and cracks, symptoms?
By: sgltrac on Thu, 26 July 2018 20:44
|
|
|
Re: [GMCnet] OEM intake manifolds and cracks, symptoms?
|
Goto Forum:
Current Time: Fri Jun 14 15:06:51 CDT 2024
Total time taken to generate the page: 0.01291 seconds
|