GMCforum: GMCnet » Aluminum intake manifold-opinions..

Home » Public Forums » GMCnet » Aluminum intake manifold-opinions..

Show: Today's Messages :: Polls :: Message Navigator

Re: [GMCnet] Aluminum intake manifold-opinions.. [message #326198 is a reply to message #326187]

Tue, 21 November 2017 08:02

USAussie

Messages: 15912
Registered: July 2007
Location: Sydney, Australia

Karma:

Senior Member

G'day,

For those of you that would like a method of permanently filling the crossover cheaply here's the items that you can use:

1) Moroso Engine Block Filler - 1 gallon $20.99 http://www.jegs.com/i/Moroso/710/35571/10002/-1

2) Mondello HR-351 Heat Riser Block Off Plates - $29.00 http://www.mondellotwister.com/GasketsSealants.htm

3) Fel-Pro Gasket Material 1/32 (0.031) thick - $4.97
https://www.ebay.com/itm/Fel-Pro-3046-Gasket-Materials-/391648482364?_trksid=p2385738.m2548.l4275

4) Permatex 85080 Ultra Black Maximum Oil Resistance RTV Silicone Gasket Maker, 9.5 oz. Power Bead Can
$19.99
https://www.amazon.com/Permatex-85080-Resistance-Silicone-PowerBead/dp/B000HBGI1M

The reason I suggested the can is because it is MUCH easier to get a nice even bead on the sealing surfaces at the front and rear of
the lifter valley.

Total cost = $74.95 plus shipping.

Regards,
Rob M.
The Pedantic Mechanic
Sydney, Australia
AUS '75 Avion - The Blue Streak TZE365V100428
USA '75 Avion - Double Trouble TZE365V100426
USA '77 Kingsley - TZE 267V100808

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

Regards, Rob M. (USAussie) The Pedantic Mechanic Sydney, Australia '75 Avion - AUS - The Blue Streak TZE365V100428 '75 Avion - USA - Double Trouble TZE365V100426

Report message to a moderator

[Message index]

		Aluminum intake manifold-opinions.. By: Scott Nutter on Sun, 19 November 2017 14:02
		Re: [GMCnet] Aluminum intake manifold-opinions.. By: powerjon on Sun, 19 November 2017 14:48
		Re: [GMCnet] Aluminum intake manifold-opinions.. By: James Hupy on Mon, 20 November 2017 10:04
		Re: [GMCnet] Aluminum intake manifold-opinions.. By: Ken Henderson on Sun, 19 November 2017 14:59
		Re: [GMCnet] Aluminum intake manifold-opinions.. By: jimk on Sun, 19 November 2017 16:02
		Re: [GMCnet] Aluminum intake manifold-opinions.. By: Mike Kelley on Sun, 19 November 2017 16:09
		Re: Aluminum intake manifold-opinions.. By: Scott Nutter on Sun, 19 November 2017 16:30
		Re: [GMCnet] Aluminum intake manifold-opinions.. By: Richard Denney on Sun, 19 November 2017 21:03
		Re: Aluminum intake manifold-opinions.. By: Ken Burton on Sun, 19 November 2017 21:14
		Re: [GMCnet] Aluminum intake manifold-opinions.. By: Ken Henderson on Sun, 19 November 2017 21:28
		Re: [GMCnet] Aluminum intake manifold-opinions.. By: jimk on Sun, 19 November 2017 22:10
		Re: [GMCnet] Aluminum intake manifold-opinions.. By: jimk on Sun, 19 November 2017 22:19
		Re: Aluminum intake manifold-opinions.. By: jhbridges on Sun, 19 November 2017 17:10
		Re: [GMCnet] Aluminum intake manifold-opinions.. By: bdub on Mon, 20 November 2017 07:44
		Re: [GMCnet] Aluminum intake manifold-opinions.. By: bdub on Mon, 20 November 2017 09:51
		Re: [GMCnet] Aluminum intake manifold-opinions.. By: Richard Denney on Mon, 20 November 2017 10:35
		Re: [GMCnet] Aluminum intake manifold-opinions.. By: James Hupy on Mon, 20 November 2017 11:04
		Re: [GMCnet] Aluminum intake manifold-opinions.. By: Harry on Mon, 20 November 2017 12:00
		Re: [GMCnet] Aluminum intake manifold-opinions.. By: USAussie on Tue, 21 November 2017 08:02
		Re: Aluminum intake manifold-opinions.. By: lw8000 on Mon, 20 November 2017 08:16
		Re: [GMCnet] Aluminum intake manifold-opinions.. By: jimk on Mon, 20 November 2017 08:27
		Re: Aluminum intake manifold-opinions.. By: Carl S. on Mon, 20 November 2017 09:13
		Re: Aluminum intake manifold-opinions.. By: Scott Nutter on Mon, 20 November 2017 17:33
		Re: [GMCnet] Aluminum intake manifold-opinions.. By: Richard Denney on Tue, 21 November 2017 14:54
		Re: Aluminum intake manifold-opinions.. By: jhbridges on Tue, 21 November 2017 07:35
		Re: [GMCnet] Aluminum intake manifold-opinions.. By: USAussie on Tue, 21 November 2017 07:49
		Re: [GMCnet] Aluminum intake manifold-opinions.. By: Ken Henderson on Tue, 21 November 2017 09:40

Previous Topic:	New governor assembly for sale
Next Topic:	[GMCnet] A/C vacuum pump

Goto Forum:

-=] Back to Top [=-

Current Time: Thu Oct 31 19:01:59 CDT 2024

Total time taken to generate the page: 0.00742 seconds