GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Aluminum intake manifold-opinions..
Re: [GMCnet] Aluminum intake manifold-opinions.. [message #326168 is a reply to message #326167] Sun, 19 November 2017 16:09 Go to previous messageGo to previous message
Mike Kelley is currently offline  Mike Kelley   United States
Messages: 467
Registered: February 2017
Karma:
Senior Member
Jim K.:
I love the way you jump in and give GMC'ers helpful info. Some people would say it is good salesmanship, but I just appreciate that you try to help us at every opportunity!!!
Thanks again,
Mike/The Corvair a holic

Sent from my iPhone

> On Nov 19, 2017, at 4:02 PM, Jim Kanomata wrote:
>
> Our Aluminum intake is a improved unit, Low Profile like the original and
> is custom machine to overcome the previous matching of ports and Air
> conditioning compressor bracket mount hole location and size. Like the
> Edelbrock, the exhaust passage is blocked standard.
>
> On Sun, Nov 19, 2017 at 12:59 PM, Ken Henderson
> wrote:
>
>> If you consider using the Edelbrock manifold, be sure to review this first:
>>
>> http://www.gmcmhphotos.com/photos/g3057-cylinder-head-
>> damage-from-exhaust-crossover-plugs.html
>>
>> Ken H.
>>
>>
>> On Sun, Nov 19, 2017 at 3:02 PM, Scott Nutter
>> wrote:
>>
>>> Hello,
>>> I might be close to removing the stock intake manifold on my 455, and was
>>> wondering the advantages of replacing it with a aluminum intake.
>>>
>>> The #1 best thing that I can see would be not ever needing the heat
>>> block-off plates, #2 would be a new product without any
>> cracks(hopefully),
>>> and #3
>>> would be the weight.
>>>
>>> Any other pro's of con's?
>>> I have searched prior post and can only find info for the 403's
>>>
>>> Thank you,
>>> Scott.
>>>
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>
>
>
>
> --
> Jim Kanomata
> Applied/GMC, Newark,CA
> jimk@appliedairfilters.com
> http://www.appliedgmc.com
> 1-800-752-7502
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: New governor assembly for sale
Next Topic: [GMCnet] A/C vacuum pump
Goto Forum:
  


Current Time: Thu Oct 31 19:32:15 CDT 2024

Total time taken to generate the page: 0.00835 seconds