GMCforum: GMCnet » [GMCnet] Onan repair or replace

Home » Public Forums » GMCnet » [GMCnet] Onan repair or replace

Show: Today's Messages :: Polls :: Message Navigator

Re: [GMCnet] Onan repair or replace [message #317448 is a reply to message #317393]

Fri, 12 May 2017 11:49

jhbridges

Messages: 8412
Registered: May 2011
Location: Braselton ga

Karma:

Senior Member

Jump pin 9 to pin 5 and see if the fuel pump comes on. If so, see if it will crank and run. If it does, the problem is on the control card or its associated connections. Report back. Or download Duane Simmons' troubleshooting file off Bdub's site and it will let you determine the problem.

--johnny

Foolish Carriage, 76 26' Eleganza(?) with beaucoup mods and add - ons. Braselton, Ga. I forgive them all, save those who hurt the dogs. They must answer to me in hell

Report message to a moderator

[Message index]

		[GMCnet] Onan repair or replace By: mjbourgon on Thu, 11 May 2017 16:01
		Re: [GMCnet] Onan repair or replace By: Ken Henderson on Thu, 11 May 2017 16:34
		Re: [GMCnet] Onan repair or replace By: Matt Colie on Thu, 11 May 2017 18:17
		Re: [GMCnet] Onan repair or replace By: mjbourgon on Fri, 12 May 2017 06:48
		Re: [GMCnet] Onan repair or replace By: JohnL455 on Thu, 11 May 2017 18:42
		Re: [GMCnet] Onan repair or replace By: tphipps on Thu, 11 May 2017 19:09
		Re: [GMCnet] Onan repair or replace By: mjbourgon on Fri, 12 May 2017 06:47
		Re: [GMCnet] Onan repair or replace By: jhbridges on Thu, 11 May 2017 19:45
		Re: [GMCnet] Onan repair or replace By: jhbridges on Thu, 11 May 2017 19:50
		Re: [GMCnet] Onan repair or replace By: JohnL455 on Fri, 12 May 2017 07:45
		Re: [GMCnet] Onan repair or replace By: jhbridges on Fri, 12 May 2017 11:49
		Re: [GMCnet] Onan repair or replace By: A Hamilto on Fri, 12 May 2017 12:38

Previous Topic:	One ton inner CV boot
Next Topic:	[GMCnet] What I found out about my LP gauge/wiring

Goto Forum:

-=] Back to Top [=-

Current Time: Thu Oct 31 19:16:45 CDT 2024

Total time taken to generate the page: 0.01704 seconds