GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » OEM vs Alcoa lug nuts
Re: [GMCnet] OEM vs Alcoa lug nuts [message #265488 is a reply to message #265466] Wed, 05 November 2014 10:08 Go to previous messageGo to previous message
emerystora is currently offline  emerystora   United States
Messages: 4442
Registered: January 2004
Karma:
Senior Member
Let me try to understand what you are saying. Are you saying that you would put an Alcoa on the outside and leave a steel wheel on the inside?
That would not make sense as they would likely be different diameters.

If you put an Alcoa on you should install two of them and take off the inside steel wheel.

Obviously you are not talking about a GMC motorhome but a truck duel wheel setup.

Emery Stora

> On Nov 4, 2014, at 9:04 PM, Dennis Sexton wrote:
>
> Just an observation -- if you have a GMC dually and add Alcoa wheels, the inside rear wheels and spare are still steel.
> Do you think they recommend you carry two style lug nuts?
>
> Dennis
>

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Fuel tank cleaning
Next Topic: [GMCnet] Got my automatic transfer switch and 30A cord installed
Goto Forum:
  


Current Time: Mon Jun 03 12:21:18 CDT 2024

Total time taken to generate the page: 3.41730 seconds