Home » Public Forums » GMCnet » [GMCnet] Why not
Re: [GMCnet] Why not [message #101002 is a reply to message #100987] |
Sat, 25 September 2010 21:54 |
Larry C
Messages: 1168 Registered: July 2004 Location: NE Illinois by the Illino...
Karma:
|
Senior Member |
|
|
I've thought about if I would want to put it in the GMC, but my Power Level works perfectly, so why?
____________________________________________________
Mine is working, so far and I support the vehicle when she will sit for more than a week. so I am hesitant to tear the system apart, especially if I create the new one, it would be experimental at best until proven. Just too many other things going on to jump on this one when it is working so so.
My design level controllers are basically the same idea using the strut from the bogie controller rods and the high low signals come from a magnet that moves across a magnetic reed relay ( magnetic ). The design has been advancing as I have studied it. The magnets trigger the relays which control the solenoids.
If the system fails completely, I may just replace all the tubing and get rid of all the extra fittings the PO had put in and, to me, are just another place for a leak to start. Hoping this might get it under control and hold air for "months" as some have proudly said they have accomplished.
The problem with the Magnet/magnetic reed relay is, Keeping it simple and tough enough to not be affected by dirt, mud or tires tearing apart is a large task to develop. I know the GMC engineers have their hands full when they come up with this stuff.
I am a strong believer in staying with an OEM design and I always remember this... " We can change anything but Should we make the change and what will be affected by that change?" The problem is we never know the result of a change until we actually do it. I can design many things and the operation is limited only to its design charactoristics but the true operation limitations will not be known until it is actually built. This also keeps me on my toes.
thanks for the comment.
Gatsbys' CRUISER 08-18-04
74 GLACIER X, 260/455-APC-4 Bagg'r
Remflex Manifold gaskets
CampGrounds needed, Add yours to "PLACES" />
http://www.gmceast.com/travel
_
|
|
|
|
|
[GMCnet] Why not
|
|
|
Re: [GMCnet] Why not
By: KRDietz on Sat, 18 September 2010 13:10
|
|
|
Re: [GMCnet] Why not
|
|
|
Re: [GMCnet] Why not
|
|
|
Re: [GMCnet] Why not
By: Larry C on Sat, 25 September 2010 06:43
|
|
|
Re: [GMCnet] Why not
By: jimk on Sat, 25 September 2010 07:56
|
|
|
Re: [GMCnet] Why not
By: WD0AFQ on Sat, 25 September 2010 08:01
|
|
|
Re: [GMCnet] Why not
|
|
|
Re: [GMCnet] Why not
|
|
|
Re: [GMCnet] Why not
By: Don A on Sat, 25 September 2010 11:17
|
|
|
Re: [GMCnet] Why not
|
|
|
Re: [GMCnet] Why not
By: jaholland on Sat, 25 September 2010 14:24
|
|
|
Re: [GMCnet] Why not
|
|
|
Re: [GMCnet] Why not
By: Larry C on Sat, 25 September 2010 15:52
|
|
|
Re: [GMCnet] Why not
By: Keith V on Sat, 25 September 2010 18:05
|
|
|
Re: [GMCnet] Why not
By: Larry C on Sat, 25 September 2010 21:54
|
|
|
Re: [GMCnet] Why not
By: Larry C on Sat, 25 September 2010 15:47
|
|
|
Re: [GMCnet] Why not
|
|
|
Re: [GMCnet] Why not
By: Larry C on Sat, 25 September 2010 21:32
|
|
|
Re: [GMCnet] Why not
|
|
|
Re: [GMCnet] Why not
|
|
|
Re: [GMCnet] Why not
By: rgogan on Sun, 17 September 2017 19:12
|
|
|
Re: [GMCnet] Why not
|
|
|
Re: [GMCnet] Why not
|
Goto Forum:
Current Time: Thu Oct 31 18:42:27 CDT 2024
Total time taken to generate the page: 0.00752 seconds
|