GMCforum: GMC Swap Meet » Parts coach wanted or stretch pieces

Home » Public Forums » GMC Swap Meet » Parts coach wanted or stretch pieces

Show: Today's Messages :: Polls :: Message Navigator

Parts coach wanted or stretch pieces [message #354152]

Sun, 26 April 2020 14:01

Hal StClair

Messages: 971
Registered: March 2013
Location: Rio Rancho NM

Karma: -12

Senior Member

I'd like to find a parts coach near me (Albuquerque, NM). Any information would be appreciated.
Thanks, Hal

"I enjoy talking to you. Your mind appeals to me. It resembles my own mind, except you happen to be insane." 1977 Royale 101348, 1977 Royale 101586, Diesel powered, 1974 Eagle Bus 45',w/slideout, Rio Rancho, NM

[Updated on: Sun, 10 May 2020 20:29]

Report message to a moderator

Re: Parts coach wanted [message #354171 is a reply to message #354152]

Mon, 27 April 2020 07:23

jhbridges

Messages: 8412
Registered: May 2011
Location: Braselton ga

Karma: -74

Senior Member

one around here. Unfortunately, 1491 miles to your place. You have to wonder whether it would make it or not.

--johnny

Foolish Carriage, 76 26' Eleganza(?) with beaucoup mods and add - ons. Braselton, Ga. I forgive them all, save those who hurt the dogs. They must answer to me in hell

Report message to a moderator

Re: Parts coach wanted [message #354206 is a reply to message #354171]

Mon, 27 April 2020 21:29

Hal StClair

Messages: 971
Registered: March 2013
Location: Rio Rancho NM

Karma: -12

Senior Member

Thanks Johnny but that's a little fer.
Hal

Report message to a moderator

Re: Parts coach wanted [message #354342 is a reply to message #354206]

Fri, 01 May 2020 15:56

Melbo

Messages: 144
Registered: August 2018
Location: Albuquerque NM

Karma: 0

Senior Member

Hal

I am always driving around so I will keep my eyes open and let you know if I see one. I will also ask my employees to do the same.

Melbo

Albuquerque NM Bus Conversion 1978 MCI 1973 GMC

Report message to a moderator

Re: Parts coach wanted or stretch pieces [message #354345 is a reply to message #354342]

Fri, 01 May 2020 18:17

Hal StClair

Messages: 971
Registered: March 2013
Location: Rio Rancho NM

Karma: -12

Senior Member

Thank you. I know there was one a year ago in Bosque but it looks to be gone now. I know the late John Williams owned a 'junker' as he called it with another friend that I'd never met. I haven't been able to contact his son so the search is on. Hal

I really only need pieces to stretch one-if you have something let me know, thanks.

[Updated on: Sun, 10 May 2020 20:27]

Report message to a moderator

Re: Parts coach wanted or stretch pieces [message #354593 is a reply to message #354152]

Mon, 11 May 2020 09:05

6cuda6

Messages: 975
Registered: June 2019

Karma: -6

Senior Member

There is a "stretch kit" on FleeBay...not mine and i know nothing about the details.

Rich Mondor, Brockville, ON 77 Hughes 2600

Report message to a moderator

Re: Parts coach wanted or stretch pieces [message #354603 is a reply to message #354593]

Mon, 11 May 2020 13:17

Hal StClair

Messages: 971
Registered: March 2013
Location: Rio Rancho NM

Karma: -12

Senior Member

Thanks, I've seen it there and before. It looks like a bunch of mostly 'junk' pieces , not enough to do the stretch I'd guess. And the price plus shipping is way out of line I'd say.
Hal

Report message to a moderator

Re: Parts coach wanted or stretch pieces [message #354724 is a reply to message #354152]

Fri, 15 May 2020 16:06

lqqkatjon

Messages: 2324
Registered: October 2010
Location: St. Cloud, MN

Karma: 5

Senior Member

Hal- the ebay - stretch parts are just south of me in rogers.

yes, he wants too much money for them on ebay and has been trying to sell them for a year now. this is the parts I believe to stretch the back bedroom, and I am familiar with this guys "uncle" Chuck Kokesh's coach.

Jon Roche 75 palm beach EBL EFI, manny headers, Micro Level, rebuilt most of coach now. St. Cloud, MN http://lqqkatjon.blogspot.com/

Report message to a moderator

Re: Parts coach wanted or stretch pieces [message #354737 is a reply to message #354724]

Sat, 16 May 2020 13:39

Hal StClair

Messages: 971
Registered: March 2013
Location: Rio Rancho NM

Karma: -12

Senior Member

Yes Jon, Wally sent me a link with the stretch build his 'uncle' did. It doesn't look like there's enough material to do the job and the price puts it out of reach, especially considering shipping.
There is a unit a fellow GMCer was going to pick up that he's volunteered the parts from but I have to wait and see how he's fared. Thanks for the heads up, Hal

Report message to a moderator

Re: Parts coach wanted or stretch pieces [message #354744 is a reply to message #354737]

Sat, 16 May 2020 16:12

Olly Schmidt

Messages: 1265
Registered: February 2014
Location: Germany and Scottsville, ...

Karma: 8

Senior Member

Hello Hal,

check with Tom McManus (94nubble on here) - he might not be near by, but maybe someone is driving cross country and can carry stuff. iirc he once tried his luck on a stretch.

Say 'hi' to your wife!

Best regards

Olly Schmidt
PGP Key ID: 0x18a9 3a1f 4196 bf22
'76a Eleganza II, VA
'73 Sequoia, SH, Germany

Report message to a moderator

Re: Parts coach wanted or stretch pieces [message #354754 is a reply to message #354345]

Sat, 16 May 2020 18:26

Burt and Faye curtis

Messages: 256
Registered: June 2012

Karma: 4

Senior Member

Hal, What pieces exactly do you need? I have a lots of aluminum frame and the steel frame parts left from the fifth wheel project and misc accumulations that Bert had collected. I don't think I really will need most of them. Let me know if you are interested.
Fay Curtis
'76 Glenbrook
Kneeland, CA

Report message to a moderator

Re: Parts coach wanted or stretch pieces [message #354808 is a reply to message #354754]

Sun, 17 May 2020 18:59

Hal StClair

Messages: 971
Registered: March 2013
Location: Rio Rancho NM

Karma: -12

Senior Member

I would like to find a roof bow, a floor cross member and at least 2 feet of drip rail, mid coach horizontal brace, lower side brace and rail over the doors. Both sides of course and it'd be great to get some of the lower body fiberglass. the upper side aluminun and roof aren't needed.
I do have a line on one but nothing has been finaled as yet. Let me know what you might have. A trip to CA might not be too bad a distraction.
Thanks, Hal

[Updated on: Sun, 17 May 2020 19:09]

Report message to a moderator

Re: Parts coach wanted or stretch pieces [message #354825 is a reply to message #354744]

Mon, 18 May 2020 07:41

94nubble

Messages: 275
Registered: July 2011
Location: Chesapeake VA

Karma: 3

Senior Member

All those pieces, parts are long gone.

Tom McManus
1977 Royale
Chesapeake VA

Report message to a moderator

Re: Parts coach wanted or stretch pieces [message #354857 is a reply to message #354808]

Tue, 19 May 2020 01:51

Burt and Faye curtis

Messages: 256
Registered: June 2012

Karma: 4

Senior Member

Hal, I will take a look this weekend - it isn't suppose to be raining then - and will get back to you. I am sure I have several of those items.
Fay

Report message to a moderator

Re: Parts coach wanted or stretch pieces [message #355119 is a reply to message #354808]

Mon, 25 May 2020 19:17

Burt and Faye curtis

Messages: 256
Registered: June 2012

Karma: 4

Senior Member

Hal, I do have the roof bow (new), the aluminum floor pieces, the lower side bows, at least one 2foot plus piece of the upper aluminum section that joins the top to the sides. I probably have some of the other pieces you need, but not sure of their cross sections. Could you send me a drawing or something that would aid me in identifying them? Will most likely be a week or two before I will have time to uncover more treasure. Still have three weeks of teaching before we are out for the summer. I don't have any of the fiberglass sections that you need, but do have a mold for the long side if you want to make your own pieces.

Fay

Report message to a moderator

Re: Parts coach wanted or stretch pieces [message #355124 is a reply to message #355119]

Tue, 26 May 2020 00:52

Hal StClair

Messages: 971
Registered: March 2013
Location: Rio Rancho NM

Karma: -12

Senior Member

Holy smokes Fay, looks like you have much of it. Where are you located?
Thank you, Hal

Report message to a moderator

Re: Parts coach wanted or stretch pieces [message #355125 is a reply to message #355124]

Tue, 26 May 2020 01:06

Burt and Faye curtis

Messages: 256
Registered: June 2012

Karma: 4

Senior Member

In up state California - outside of Eureka - Kneeland to be precise. Right now we are still in semi-lock down, no campgrounds or motels open. However, I do have area for camping on my property. Can also ship what you might want, or as they aren't going anywhere soon might be able to have someone bring them to Phoenix in late summer. Or can keep you informed regarding loosening of restrictions. Bert was a waste not want not kind of guy and I would rather see parts used than melted down.

Report message to a moderator

Re: Parts coach wanted or stretch pieces [message #355126 is a reply to message #354152]

Tue, 26 May 2020 07:25

jhbridges

Messages: 8412
Registered: May 2011
Location: Braselton ga

Karma: -74

Senior Member

Western distances are deceiving. That's only 200 miles closer than here.

--johnny

Foolish Carriage, 76 26' Eleganza(?) with beaucoup mods and add - ons. Braselton, Ga. I forgive them all, save those who hurt the dogs. They must answer to me in hell

Report message to a moderator

Re: Parts coach wanted or stretch pieces [message #355136 is a reply to message #355126]

Tue, 26 May 2020 09:08

Richard RV

Messages: 631
Registered: July 2012
Location: Full-timer for 12 years, ...

Karma: -17

Senior Member

Hal is no stranger to driving long distances, Johnny. For a while his commute was longer than most people would believe. 1400 miles for him would be just a jaunt...besides, gas is very attractively priced.

I also encourage GMC master fabricators to get together often and collaborate. It will hasten the future. The good one. 😉

Richard

'77 Birchaven TZE...777; '76 Palm Beach under construction; ‘76 Edgemont waiting its turn

Report message to a moderator

Re: Parts coach wanted or stretch pieces [message #355172 is a reply to message #355136]

Wed, 27 May 2020 00:06

Hal StClair

Messages: 971
Registered: March 2013
Location: Rio Rancho NM

Karma: -12

Senior Member

Burt, I don't know what the cross sections look like yet as I've not cut the coach apart. I've been trying to locate 'pieces' before doing so. Another member I spoke with was trying to buy a derelict 23' that may still happen but I'm chasing down all possibilities at this point.
My brother lives out of Carson City and we plan on heading that way in 6 or so weeks so it'd be a short jaunt to your place.
I did commute from Las Vegas to Albuquerque and back most every week for almost 3 years so the drive isn't a killer.
Thank You again, Hal

Report message to a moderator

Pages (2): [1 2 › »]

Previous Topic:	WTB: GMC Rectangular headlight kit
Next Topic:	WTB.....AC hoses

Goto Forum:

-=] Back to Top [=-

Current Time: Thu Oct 31 19:13:43 CDT 2024

Total time taken to generate the page: 0.01150 seconds