Home » Public Forums » GMCnet » FMCA Tire Program a good deal?
| FMCA Tire Program a good deal? [message #348681] |
Sun, 29 September 2019 11:33  |
rjw
Messages: 697
Registered: September 2005
Karma: 4
|
Senior Member |
|
|
Recently I purchased 2 tires. My tire of choice these days is the BFGoodrich Commercial T/A tire. They are available locally for about $156 not including installation and tire disposal.
Since many here love the FMCA tire program, I thought I would take a look.
I logged in and entered the info for light truck, clicked on LT225/75R/16 and was presented with a list of 4 BFGoodrich and 2 Michelin tires. The list didn't really show "Commercial T/A". I had to Google the MSPN numbers to find the "BFGOODRICH LT225/75R16115R COMMTAAS2LREGO" which seems to be "Commercial T/A" tire. The price shown is $166.89 which is over $10/tire more than what I can get from the local tire dealers. If I were to spend more to get these "deals" I assume that I would have to find someone to install them etc.
What am I missing here? Does not seem like a good deal to me.
By the way, I emailed FMCA about this (high price and difficulty in the interpretation of the listing) on 2 different occasions and never heard back.
Richard
76 Palm Beach
SE Michigan
www.PalmBeachGMC.com
Roller Cam 455, TBI+EBL, 3.42 FD, 4 Bag, Macerator, Lenzi (brakes, vacuum system, front end stuff), Manny Tranny, vacuum step, Tankless + OEM water heaters.
|
|
|
|
| Re: FMCA Tire Program a good deal? [message #348686 is a reply to message #348681] |
Sun, 29 September 2019 12:52  |
roy1
Messages: 2126
Registered: July 2004
Location: Minden nevada
Karma: 6
|
Senior Member |
|
|
The last tires I bought for the GMC were Bridgestone that I got at Costco they were at one of their ongoing tire deals they are nice tires A year ago I bought 6 22.5 " tires for a large vehicle they were more then $200 each. Locally everyone wanted too much. I bought them on line from a place in Chicago free delivery no state tax. I saved a lot of cash. If you go this route make sure you call and verify dot # or you will likely get old tires. Some will give you the tire age some will not. I had no trouble finding a place to install them.
Roy Keen
Minden,NV
76 X Glenbrook
[Updated on: Sun, 29 September 2019 12:53] Report message to a moderator |
|
|
|
| Re: FMCA Tire Program a good deal? [message #348702 is a reply to message #348686] |
Sun, 29 September 2019 18:24 |
tphipps
Messages: 3005
Registered: August 2004
Location: Spanish Fort, AL
Karma: 9
|
Senior Member |
|
|
I installed Dextro (?) LT tires from Wal-Mart on my GMC. After 7 years, still in good shape. Current price $104 installed. However, they would not install them on the GMC. I had to remove and re-install the wheels. They did put them on the rims. Not a big deal.
I like the fact that all 4400 Wal-Marts will honor without question their warranty. Travelling across country reduces my worry factor.
The tire is also in stock, no ordering and waiting.
Tom
2012 Phoenix Cruiser model 2552
KA4CSG
|
|
|
|
| Re: FMCA Tire Program a good deal? [message #348704 is a reply to message #348702] |
Sun, 29 September 2019 19:27 |
Hal StClair
Messages: 971
Registered: March 2013
Location: Rio Rancho NM
Karma: -12
|
Senior Member |
|
|
The FMCA 'deal' isn't so much anymore I'm afraid. It may be that the organization is skimming more than they used too?? but the prices can probably be beat with a bit of research. Just put a pair of tires on the front of the bus (315/80/22.5) in sales tax friendly Oregon-$1750 for the pair installed. That hurt....
Hal
"I enjoy talking to you. Your mind appeals to me. It resembles my own mind, except you happen to be insane."
1977 Royale 101348,
1977 Royale 101586, Diesel powered,
1974 Eagle Bus 45',w/slideout,
Rio Rancho, NM
|
|
|
|
| Re: FMCA Tire Program a good deal? [message #348726 is a reply to message #348681] |
Mon, 30 September 2019 10:11 |
jhbridges
Messages: 8412
Registered: May 2011
Location: Braselton ga
Karma: -74
|
Senior Member |
|
|
One reason I passed on the GM bus conversion. Needed six tires. Then, like my GMC, I'd get to find out what it needed. BTW did you finish the Corvette yet? Pics?
--johnny
Foolish Carriage, 76 26' Eleganza(?) with beaucoup mods and add - ons.
Braselton, Ga.
I forgive them all, save those who hurt the dogs. They must answer to me in hell
|
|
|
|
| Re: FMCA Tire Program a good deal? [message #348732 is a reply to message #348726] |
Mon, 30 September 2019 12:00 |
Hal StClair
Messages: 971
Registered: March 2013
Location: Rio Rancho NM
Karma: -12
|
Senior Member |
|
|
Sorry Johnny, not yet. Always seem to be other 'projects' in the works. Did a GMC for our daughter, almost completely redid a 1990 VW Cabriolet for a towd then changed up and bought a fixer Mini we now tow. Not to mention the new Duramax/Allison pusher GMC project I'm in the early stages of building. Some day I hope, Lord willing.
Hal
"I enjoy talking to you. Your mind appeals to me. It resembles my own mind, except you happen to be insane."
1977 Royale 101348,
1977 Royale 101586, Diesel powered,
1974 Eagle Bus 45',w/slideout,
Rio Rancho, NM
|
|
|
|
| Re: FMCA Tire Program a good deal? [message #348733 is a reply to message #348681] |
Mon, 30 September 2019 12:13 |
jhbridges
Messages: 8412
Registered: May 2011
Location: Braselton ga
Karma: -74
|
Senior Member |
|
|
Diesel pusher GMC? Tell me more. I can see several ways that might be done, but I've no idea the weight and its distribution, what you'd lose in space in back and/or gain up front. What you do is, one day a week,or a half day is 'Corvette day'. No more, no less. Scare you how quickly it gets done without taking away from the other projects. (Easy for me to say)
--johnny
Foolish Carriage, 76 26' Eleganza(?) with beaucoup mods and add - ons.
Braselton, Ga.
I forgive them all, save those who hurt the dogs. They must answer to me in hell
|
|
|
|
| Re: FMCA Tire Program a good deal? [message #348734 is a reply to message #348681] |
Mon, 30 September 2019 12:15 |
jhbridges
Messages: 8412
Registered: May 2011
Location: Braselton ga
Karma: -74
|
Senior Member |
|
|
And there's just two rides I'd consider in place of the Soul for a toad, a Mini Moke and/or a VW Thing. The few out there are way beyond my reach.
--johnny
Foolish Carriage, 76 26' Eleganza(?) with beaucoup mods and add - ons.
Braselton, Ga.
I forgive them all, save those who hurt the dogs. They must answer to me in hell
|
|
|
|
| Re: [GMCnet] FMCA Tire Program a good deal? [message #348735 is a reply to message #348732] |
Mon, 30 September 2019 12:38 |
Mike Kelley
Messages: 467
Registered: February 2017
Karma: -2
|
Senior Member |
|
|
Wow Hal S.:
You are one busy guy - keep doin it - I believe that is what keeps us oldsters young!!!
I sure admire your knowledge, capabilities, and drive. At 79 my drive has all but gotten up and driven off - but I still try to keep up w/ my 3 GMC’s and 13 Corvairs.
Mike/The Corvair a holic
Sent from my iPhone
> On Sep 30, 2019, at 12:00 PM, Hal StClair via Gmclist wrote:
>
> Sorry Johnny, not yet. Always seem to be other 'projects' in the works. Did a GMC for our daughter, almost completely redid a 1990 VW Cabriolet for a
> towd then changed up and bought a fixer Mini we now tow. Not to mention the new Duramax/Allison pusher GMC project I'm in the early stages of
> building. Some day I hope, Lord willing.
> Hal
> --
> 1977 Royale 101348,
>
> 1977 Royale 101586, Diesel powered,
>
> 1975 Eleganza II, 101230,
>
> 1974 Eagle Bus 45',w/slideout,
>
> Rio Rancho, NM
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
|
|
|
|
| Re: FMCA Tire Program a good deal? [message #348742 is a reply to message #348733] |
Mon, 30 September 2019 17:03 |
Hal StClair
Messages: 971
Registered: March 2013
Location: Rio Rancho NM
Karma: -12
|
Senior Member |
|
|
Johnny Bridges wrote on Mon, 30 September 2019 11:13Diesel pusher GMC? Tell me more. I can see several ways that might be done, but I've no idea the weight and its distribution, what you'd lose in space in back and/or gain up front. What you do is, one day a week,or a half day is 'Corvette day'. No more, no less. Scare you how quickly it gets done without taking away from the other projects. (Easy for me to say)
--johnny
That's a great idea Johnny, half a day a week.
We just picked up another project-a 12x30 office trailer I'm converting into a kitchen/laundry/bathroom/eating area for our Quartzsite property. Hope to make it a kind of common area for visitors. We have an acre, graveled with city water and sewer and 3 200 amp meters. Hope to have a GMC get together some day.
As for the GMC, 2007 LBZ, 6 sp Allison in the rear under a center queen bed, drive shaft forward to a 9 3/4" Ford IRS flipped (Navigator, Expedition IRS rear). Front radiators(liquid to air inter cooler ,as in late Ford diesel, radiator up front) with 5kw Kubota diesel genset, fuel tank and batteries up front. Water and holding tanks as far forward as possible. With available macerator toilets tank location is anywhere there's space. Moving 400lbs of Onan and 40 gallons of water and waste tanks from the rear makes balance within 300-400 lbs.
Still in the deep planning stages, looking for a supplier for frame rail-way more difficult than you'd think.
As for keeping moving Mike, 13 Corvairs should really keep you busy 
Hal
"I enjoy talking to you. Your mind appeals to me. It resembles my own mind, except you happen to be insane."
1977 Royale 101348,
1977 Royale 101586, Diesel powered,
1974 Eagle Bus 45',w/slideout,
Rio Rancho, NM
|
|
|
|
| Re: [GMCnet] FMCA Tire Program a good deal? [message #348743 is a reply to message #348742] |
Mon, 30 September 2019 18:18 |
Mike Kelley
Messages: 467
Registered: February 2017
Karma: -2
|
Senior Member |
|
|
Hal S.:
Tires, oil, and water (oh no - no water) and wash jobs alone are a challenge - let alone dealing w/ a GMC or 3.
But I love it, so do it while I can!!!
Mike/The Corvair a holic
Sent from my iPhone
> On Sep 30, 2019, at 5:03 PM, Hal StClair via Gmclist wrote:
>
> Johnny Bridges wrote on Mon, 30 September 2019 11:13
>> Diesel pusher GMC? Tell me more. I can see several ways that might be done, but I've no idea the weight and its distribution, what you'd lose in
>> space in back and/or gain up front. What you do is, one day a week,or a half day is 'Corvette day'. No more, no less. Scare you how quickly it
>> gets done without taking away from the other projects. (Easy for me to say)
>>
>> --johnny
>
> That's a great idea Johnny, half a day a week.
> We just picked up another project-a 12x30 office trailer I'm converting into a kitchen/laundry/bathroom/eating area for our Quartzsite property. Hope
> to make it a kind of common area for visitors. We have an acre, graveled with city water and sewer and 3 200 amp meters. Hope to have a GMC get
> together some day.
> As for the GMC, 2007 LBZ, 6 sp Allison in the rear under a center queen bed, drive shaft forward to a 9 3/4" Ford IRS flipped (Navigator, Expedition
> IRS rear). Front radiators(liquid to air inter cooler ,as in late Ford diesel, radiator up front) with 5kw Kubota diesel genset, fuel tank and
> batteries up front. Water and holding tanks as far forward as possible. With available macerator toilets tank location is anywhere there's space.
> Moving 400lbs of Onan and 40 gallons of water and waste tanks from the rear makes balance within 300-400 lbs.
> Still in the deep planning stages, looking for a supplier for frame rail-way more difficult than you'd think.
> As for keeping moving Mike, 13 Corvairs should really keep you busy :d
> Hal
> --
> 1977 Royale 101348,
>
> 1977 Royale 101586, Diesel powered,
>
> 1975 Eleganza II, 101230,
>
> 1974 Eagle Bus 45',w/slideout,
>
> Rio Rancho, NM
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
|
|
|
|
| Re: FMCA Tire Program a good deal? [message #348757 is a reply to message #348681] |
Tue, 01 October 2019 07:51 |
jhbridges
Messages: 8412
Registered: May 2011
Location: Braselton ga
Karma: -74
|
Senior Member |
|
|
Hal, does this lose the rear axle, or drive it and have the tag in front? Or drive the front (Middle actually) and leave the rear bogies? (Wish you were closer, I'd love to watch and hand tools for that) Note - anybody who stands on the StClair's patio and looks out understands why they live there. It ain't the Appalachians but it ain't bad!
--johnny
Foolish Carriage, 76 26' Eleganza(?) with beaucoup mods and add - ons.
Braselton, Ga.
I forgive them all, save those who hurt the dogs. They must answer to me in hell
|
|
|
|
| Re: FMCA Tire Program a good deal? [message #348770 is a reply to message #348757] |
Tue, 01 October 2019 10:59 |
Hal StClair
Messages: 971
Registered: March 2013
Location: Rio Rancho NM
Karma: -12
|
Senior Member |
|
|
Johnny,
Rear axles stay where they are, still FWD using the 9 3/4" Ford IRS center section(flipped). Probably use a 3 piece drive shaft running through the cross members.
Looked at driving the center axle but the suspension would really intrude into the living area besides being quite a unique/difficult frame modification. The motor/trans would cantilever behind requiring a bit of engineering. The front drive looks to be the best bet.
Hal
"I enjoy talking to you. Your mind appeals to me. It resembles my own mind, except you happen to be insane."
1977 Royale 101348,
1977 Royale 101586, Diesel powered,
1974 Eagle Bus 45',w/slideout,
Rio Rancho, NM
|
|
|
|
Goto Forum:
Current Time: Fri Sep 06 11:51:13 CDT 2024
Total time taken to generate the page: 0.00775 seconds
|
GMCforum
Search
Help
Register
Login
Home
