GMCforum: GMCnet » Out with the old- in with the new.

Home » Public Forums » GMCnet » Out with the old- in with the new. (Replacing the original pump.)

Show: Today's Messages :: Polls :: Message Navigator

Re: [GMCnet] Out with the old- in with the new. [message #327654 is a reply to message #327653]

Mon, 01 January 2018 20:41

Ken Burton

Messages: 10030
Registered: January 2004
Location: Hebron, Indiana

Karma:

Senior Member

Kingsley Coach wrote on Mon, 01 January 2018 19:47

There are replacement pistons and flapper valves to rebuild the
original...had you asked on line here.
Remember, we're all in this together !

Mike in NM

**SNIP **

I rebuilt mine in about an hour about 14 years ago. It is still running fine.
This is one of those items that is used do little that I feel a rebuild is a better choice than replacement. On an all day trip in travel it runs once or twice for 30 seconds or so each time. I do carry a Harbor freight 12 volt tire inflation compressor that could be quickly attached if the OEM DANA should quit.

Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana

Report message to a moderator

[Message index]

		Out with the old- in with the new. By: Ralph on Mon, 01 January 2018 16:54
		Re: [GMCnet] Out with the old- in with the new. By: Kingsley Coach on Mon, 01 January 2018 19:47
		Re: [GMCnet] Out with the old- in with the new. By: Ken Burton on Mon, 01 January 2018 20:41
		Re: [GMCnet] Out with the old- in with the new. By: Richard Denney on Mon, 01 January 2018 22:43
		Re: [GMCnet] Out with the old- in with the new. By: Ken Burton on Tue, 02 January 2018 03:29
		Re: [GMCnet] Out with the old- in with the new. By: Richard Denney on Tue, 02 January 2018 07:42
		Re: [GMCnet] Out with the old- in with the new. By: USAussie on Tue, 02 January 2018 15:16

Previous Topic:	SOLD!! 73 Couch/Bunk Complete
Next Topic:	Antifreeze additive refresh

Goto Forum:

-=] Back to Top [=-

Current Time: Thu Oct 31 19:19:41 CDT 2024

Total time taken to generate the page: 0.00576 seconds