GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » [GMCnet] Accident in Washington
Re: [GMCnet] Accident in Washington [message #322737 is a reply to message #322682] Sun, 27 August 2017 11:19 Go to previous messageGo to previous message
Brian K is currently offline  Brian K   United States
Messages: 75
Registered: May 2017
Location: Sherman Oaks, CA
Karma:
Member
Sully,

I'm living near "Crossroads", by Bel-Red and 148th. I'm renting a house from the same client/friend who sold me my GMC!! Hahaha. I used to live in Issaquah.

He's a great guy but his place is out in Bremerton now, and it's just too much of a haul to take it there all the time for service. I found some one up in Lynnwood who was recommended by a former GMC owner and they seemed trustworthy. When I took it to him, he found out that that most of my brakes were shot.

As I mentioned in my other post, I'm heading home now from Wyoming, after my distributor failed. So far I've gotten about 600 miles without a hitch. However, I'd love to find some local, knowledgeable people in Washington who can look over my coach and let me know what else needs attention. I'd love to be able to take it down to Allied and leave it for an inspection--but that climb from Medford to Redding scares the crap out of me!!

Brian



sgltrac wrote on Sat, 26 August 2017 11:19
Where abouts in bellevue are you Brian?

Sully
77 eleganza 2
Bellevue, Wa.

On Fri, Aug 25, 2017 at 9:18 PM John Phillips
wrote:

> Dave,
> Do you have an agreed upon value policy?
> My PO subjected getting an agreed upon value policy with progressive to
> eliminate getting a surprise low blue book value settlement.
> John Phillips,
> 1975 Avion
> Rancho Cordova, CA
>
>
>
> On Fri, Aug 25, 2017 at 7:21 PM, Carl Stouffer wrote:
>
>> If you can buy it back from the insurance company, Mike Miller has two
>> Birchavens for sale in Hillsboro. One is a runner with an engine noise
> and
>> the
>> other was going to be a project. Might be a good place to put all your
>> salvaged good parts.
>>
>> https://portland.craigslist.org/wsc/rvs/d/gmc-birchaven-
>> motorhomes-2/6271308519.html
>> --
>> Carl Stouffer
>> '75 ex Palm Beach
>> Tucson, AZ.
>> Chuck Aulgur Reaction Arm Disc Brakes, Quadrabags, 3.70 LSD final drive,
>> Lenzi knuckles/hubs, Dodge Truck 16" X 8" front wheels, Rear American
>> Eagles,
>> Solar battery charging. GMCSJ and GMCMI member
>>
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>
>
>
>
> --
>
> *John Phillips*
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org




Brian K 1977 Eleganza II, TZE167V100261 Sherman Oaks, CA Rebuilt 455, New brake system, a lot of Original Equipment ready to fall apart (discovering more as I go along....)

[Updated on: Sun, 27 August 2017 11:20]

Report message to a moderator

 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: [GMCnet] tranny gasket part # (without filter?)
Next Topic: [GMCnet] Bearing Puller Atlanta
Goto Forum:
  


Current Time: Thu Oct 31 19:17:15 CDT 2024

Total time taken to generate the page: 0.00799 seconds