Home » Public Forums » GMCnet » Dimensions needed for GMC MH Model Kit Project
|
|
| Re: [GMCnet] Dimensions needed for GMC MH Model Kit Project [message #237996 is a reply to message #237977] |
Wed, 29 January 2014 17:45   |
 |
USAussie
Messages: 15912
Registered: July 2007
Location: Sydney, Australia
Karma: 6
|
Senior Member |
|
|
John,
On January 20th you sent me an email with all these drawing and asked me to get them. I printed them all out and told you I would be
happy to do so and would take the measurements the next time I was at my workshop. You noted that you weren't in a hurry for them. I
have not been to my workshop since then due to issues I am dealing with at home.
Now you've published them which is going to cause redundant effort by people who participate in this forum!
Regards,
Rob M.
Sydney, Australia
AUS '75 Avion - The Blue Streak TZE365V100428
USA '75 Avion - Double Trouble TZE365V100426
-----Original Message-----
From: John Fleming
Hey all,
I need some dims. Here is a bunch of drawings with the dims I need called out.
http://coldnorth.com/johnnycrash/MMI/GMCMH/R&D/
Hopefully, it all makes sense. Measurements can be in Inches, mm, or cubits, I can do the math. :d
Thank you all.
John
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Regards,
Rob M. (USAussie)
The Pedantic Mechanic
Sydney, Australia
'75 Avion - AUS - The Blue Streak TZE365V100428
'75 Avion - USA - Double Trouble TZE365V100426
|
|
|
|
| Re: [GMCnet] Dimensions needed for GMC MH Model Kit Project [message #238007 is a reply to message #237996] |
Wed, 29 January 2014 18:50 |
Johnnycrash
Messages: 55
Registered: January 2014
Location: Timmins, Ontario, Canada
Karma: 0
|
Member |
|
|
Hey Rob,
You are right, I did email pics to you for dims. And I greatly appreciate the offer of help. And posting this publicly, as such, I in no way meant to insult you. And it's not because you haven't had time to get me numbers (you, unlike myself, have a life).
While I am in no real hurry, I just thought a bunch of people working on it would be better than trying to have one person provide all the data.
| USAussie wrote |
Now you've published them which is going to cause redundant effort by people who participate in this forum!
|
Getting some, what would seem to be, redundant data is not a bad thing here. It will help ensure the data is right, by multiple points being close or the same.
.
John Fleming
http://www.coldnorth.com/johnnycrash/MMI/GMCMH
Building my own GMC Motorhome from scratch. Problem is, it's only 1/25.
|
|
|
|
| Re: [GMCnet] Dimensions needed for GMC MH Model Kit Project [message #238019 is a reply to message #238007] |
Wed, 29 January 2014 19:41 |
|
USAussie
Messages: 15912
Registered: July 2007
Location: Sydney, Australia
Karma: 6
|
Senior Member |
|
|
John,
I am about to head down to my workshop and I'll get as many of the measurements I can for you today.
Being the anally retentive pedantic bastard that I am you can bet dollars to donuts that they'll be correct! ;-)
I discovered The Big Bang Theory while I was in the USA last year and I have gotten addicted to it. It is shown down here and I have
come to realize I'm a lot like Sheldon in some ways. I'm not as egocentric though. Well I believe I'm not anyway! ;-)
Regards,
Rob M.
Sydney, Australia
-----Original Message-----
From: John Fleming
Hey Rob,
You are right, I did email pics to you for dims. And I greatly appreciate the offer of help. And posting this publicly, as such, I
in no way meant to insult you. And it's not because you haven't had time to get me numbers (you, unlike myself, have a life).
While I am in no real hurry, I just thought a bunch of people working on it would be better than trying to have one person provide
all the data.
USAussie wrote
> Now you've published them which is going to cause redundant effort by people who participate in this forum!
Getting some, what would seem to be, redundant data is not a bad thing here. It will help ensure the data is right, by multiple
points being close or the same.
John
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Regards,
Rob M. (USAussie)
The Pedantic Mechanic
Sydney, Australia
'75 Avion - AUS - The Blue Streak TZE365V100428
'75 Avion - USA - Double Trouble TZE365V100426
|
|
|
|
| Re: [GMCnet] Dimensions needed for GMC MH Model Kit Project [message #238025 is a reply to message #238019] |
Wed, 29 January 2014 20:19 |
|
|
John and Rob,
A relatively easy way to do this would be to volunteer to take measurements
on a particular image. For instance, Rob, you could say I'll do the
passenger side of the 260 and have at it. That way, another dude who
actually owns a 23-footer, could say he'd get his wife to do the driver
side, etc. That way, those who've expressed an interest in this project
could put their hands, eyes, feet, and brain where their fingers were when
the jumped in with so much excitement.
Just sayin'
Byron Songer
Louisville, KY
Robert Mueller wrote:
> John,
>
> I am about to head down to my workshop and I'll get as many of the
> measurements I can for you today.
>
> Being the anally retentive pedantic bastard that I am you can bet dollars to
> donuts that they'll be correct! ;-)
>
> I discovered The Big Bang Theory while I was in the USA last year and I have
> gotten addicted to it. It is shown down here and I have
> come to realize I'm a lot like Sheldon in some ways. I'm not as egocentric
> though. Well I believe I'm not anyway! ;-)
>
> Regards,
> Rob M.
> Sydney, Australia
>
> -----Original Message-----
> From: John Fleming
>
> Hey Rob,
>
> You are right, I did email pics to you for dims. And I greatly appreciate the
> offer of help. And posting this publicly, as such, I
> in no way meant to insult you. And it's not because you haven't had time to
> get me numbers (you, unlike myself, have a life).
>
> While I am in no real hurry, I just thought a bunch of people working on it
> would be better than trying to have one person provide
> all the data.
>
> USAussie wrote
>> Now you've published them which is going to cause redundant effort by people
>> who participate in this forum!
>
> Getting some, what would seem to be, redundant data is not a bad thing here.
> It will help ensure the data is right, by multiple
> points being close or the same.
>
> John
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
--
Byron Songer
Full-timing to enjoy the USA
Former owner but still an admirer
GMC paint schemes at -
http://www.songerconsulting.net
|
|
|
|
|
|
| Re: Dimensions needed for GMC MH Model Kit Project [message #238065 is a reply to message #237977] |
Thu, 30 January 2014 07:57 |
verg
Messages: 54
Registered: September 2006
Location: Gettysburg, PA
Karma: 0
|
Member |
|
|
Once you have collected and collated the measurements, would you please post the data? I'm sure at some point someone else may want this data in the future.
Thanks!
John Novicki
near Gettysburg, Pa
Looking for Glenbrook Yellow Plaid Material
'75 Glenbrook 26' "Bumble"
'86 300SL
|
|
|
|
|
|
| Re: Dimensions needed for GMC MH Model Kit Project [message #238083 is a reply to message #238065] |
Thu, 30 January 2014 09:52 |
Johnnycrash
Messages: 55
Registered: January 2014
Location: Timmins, Ontario, Canada
Karma: 0
|
Member |
|
|
| Loffen wrote |
Bazzzzinga !!!! I can take the structure beams if needed 
|
That would be great Sheldon. Thanks. These I thought would be the hardest to get, as they are usually hidden, and never seen. Unless something bad has happened, or you have taken on a project that will destroy you (and maybe a coach or three). 
There are other structural members I would love to get dims on too. But there are not needed to design and build the model kit. They are for another project I would like to do: A complete detailed computer model of the coach. There are a couple of beams there I didn't do up yet. The big H-Beam at the belt-line, and the 2 (2+ a C-Channel??) at the side/roof transition. As well as the C-Channel that most of the roof's longitudinal beams are made of. As seen in this pic here.
| verg wrote |
Once you have collected and collated the measurements, would you please post the data? I'm sure at some point someone else may want this data in the future.
|
Oh, absolutely. This data is not secret stuff or anything.
But once I have drawings and stuff done, I will share, and give credit where it is due, of course.
.
John Fleming
http://www.coldnorth.com/johnnycrash/MMI/GMCMH
Building my own GMC Motorhome from scratch. Problem is, it's only 1/25.
[Updated on: Thu, 30 January 2014 09:53] Report message to a moderator |
|
|
|
| Re: Dimensions needed for GMC MH Model Kit Project [message #238086 is a reply to message #237977] |
Thu, 30 January 2014 09:58 |
Johnnycrash
Messages: 55
Registered: January 2014
Location: Timmins, Ontario, Canada
Karma: 0
|
Member |
|
|
Oh Rob, I know about the anal thing.  I am the same way. Look at the trouble I am going through to make a model kit. I could just cut up a couple of HESS vans, and be done with it. 99% of the people looking at it will know what it is, and be happy with it. But *I* will only the see the glaring errors in the shape and proportions and details, and so on.  Can't have that. Nope.
And Byron, you have a good idea there: people grab a section, and go from there. I like that.
.
John Fleming
http://www.coldnorth.com/johnnycrash/MMI/GMCMH
Building my own GMC Motorhome from scratch. Problem is, it's only 1/25.
|
|
|
|
| Re: Dimensions needed for GMC MH Model Kit Project [message #238095 is a reply to message #237977] |
Thu, 30 January 2014 10:48 |
Johnnycrash
Messages: 55
Registered: January 2014
Location: Timmins, Ontario, Canada
Karma: 0
|
Member |
|
|
Crap, one more thing for this morning...
Anyone have a coach that (they can get to and) has the windshield out??
What I would REALLY like to get is the shape of both the top and bottom of the opening. This would provide me with tons of data on the window, of course, but of the body shape for the front. Actually, one could measure the window itself, and get almost the same data. That would work too.
If you have such a coach, and willing to help... Please get in touch with about how to measure this up.
There are three ways to do it:
1) Send me a windshield or a complete front clip (probably not feasible).
2) Trace the shape on paper stuck to a piece of plywood (to keep it stiff), and send that to me, or...
3) Provide data points per this diagram here.
http://coldnorth.com/johnnycrash/MMI/GMCMH/R&D/
.
John Fleming
http://www.coldnorth.com/johnnycrash/MMI/GMCMH
Building my own GMC Motorhome from scratch. Problem is, it's only 1/25.
|
|
|
|
|
|
| Re: Dimensions needed for GMC MH Model Kit Project [message #238115 is a reply to message #238095] |
Thu, 30 January 2014 13:19 |
bryant374
Messages: 563
Registered: May 2004
Location: Pleasant Valley, NY 12569
Karma: 1
|
Senior Member |
|
|
John,
There were a number of changes/modifications throughout the six years of production. Some documented, some not, some known, some not so well. These comments are intended to make your choices hopefully simpler.
Comments:
- Choose the model years 1975-1978. The design had settled down, the early years had many changes.
- Choose the "standard" window layout for the base model. It had the largest build/was most popular.
- There were body structure changes for most years. Most would probably not bother your design, just don't be suprised, they are not all the same.
- If you choose a "model" be aware of its intended purpose, i.e., the 1/16 model was for CD studies (smooth, detail missing).
Hess model looks great, Barbie & HotWheels almost can't tell they represent GMC MHs.
- The GMC body dimension document was for internal structure location for upfitters without concern for exteriors.
- Sirums in FL have a number of stripped GMCs in their back lot. I do have a number of internal photos of these, not sure they would be of any use to you.
Bill Bryant
PO 1976~PB (owned 34 years)
1914 Ford (owned 70 years)
1965 Corvette (owned 39 years)
GMC Motorhome History
|
|
|
|
| Re: Dimensions needed for GMC MH Model Kit Project [message #238117 is a reply to message #238115] |
Thu, 30 January 2014 13:56 |
Johnnycrash
Messages: 55
Registered: January 2014
Location: Timmins, Ontario, Canada
Karma: 0
|
Member |
|
|
| Loffen wrote |
Oh nothing bad and just an easy project, I have no worries
Hmm.. there might be one.. You are not working for the Chineese guys are you ?
|
BTW, your picture didn't show up, at least for me. But I did find it, I think, after a little surfing.
As for the "Chineese guys"... I have NO idea what that is in reference too. Sorry.
| bryant374 wrote |
There were a number of changes/modifications throughout the six years of production. Some documented, some not, some known, some not so well.
|
Thanks Bill. But I am aware of these issues. That's why I am here, to try and document and/or clarify as many as possible. Ugh!
| Quote: |
- Choose the model years 1975-1978. The design had settled down, the early years had many changes.
|
My understanding, and research so far, shows that the basic shape, once set before production, didn't change. Other than window placement and the like. As each model's interior would dictate the placement of the windows and the like. And with interior layout/equipment changes, exterior bits changed too: Vents, grills, access hatches...
| Quote: |
- Choose the "standard" window layout for the base model. It had the largest build/was most popular.
|
My plan, as of now, is to be able to put the kit together in a modular way, so almost ALL variations are possible. Subject to change, of course. And of course, everyone who has made mods to their coach, will have yet another version of the layout and window placement. Right now, I am working on the 3 basic models each for the 230 and 260. See this graphic here.
| Quote: |
- There were body structure changes for most years. Most would probably not bother your design, just don't be suprised, they are not all the same.
|
No surprise for me here. Internal changes affect the look of the exterior, of course, where windows and that are concerned. There could be 1 or 100 internal changes, but as you say, probably not bother my design.
| Quote: |
- If you choose a "model" be aware of its intended purpose, i.e., the 1/16 model was for CD studies (smooth, detail missing).
Hess model looks great, Barbie & HotWheels almost can't tell they represent GMC MHs.
|
As reference?? Never. I'm smarter than your average bear. So, as soon as I saw them, I knew they were wrong. Well, the 1/16 model is not wrong as such, but not fully detailed out. It would be useful to have one to grab contours off of. But, I ain't gots one. So... The Barbie version is, well, it's like, hmm.. Well, it is. Just that. The HESS van is interesting, as the most accurate, sorta. It's got all the features of the 260, crammed into the length of the 230. This changes the contour of the front the most, making it too upright. The windshield needs to lean back more.
| Quote: |
- The GMC body dimension document was for internal structure location for upfitters without concern for exteriors.
|
Yeah, I know. Damnitalltohell. That's why I am here, trying to get more numbers to work with.
| Quote: |
- Sirums in FL have a number of stripped GMCs in their back lot. I do have a number of internal photos of these, not sure they would be of any use to you.
|
More reference material is always welcome. If you are willing to share, I would be very appreciative. Thank you.
http://coldnorth.com/johnnycrash/MMI/GMCMH/R&D/
.
John Fleming
http://www.coldnorth.com/johnnycrash/MMI/GMCMH
Building my own GMC Motorhome from scratch. Problem is, it's only 1/25.
|
|
|
|
| Re: Dimensions needed for GMC MH Model Kit Project [message #238119 is a reply to message #238117] |
Thu, 30 January 2014 14:10 |
 |
Loffen
Messages: 1087
Registered: August 2013
Location: Norway
Karma: 1
|
Senior Member |
|
|
As for the "Chineese guys"... I have NO idea what that is in reference too. Sorry.
My bad, Chineese as copy cat's, going so close in to the details made me wonder if we would see the chineese full size version of our GMC on the road soon
And not a bad wourd about the chinese people, I was in a relationship with a chinese girl not so long a go
1973 23' # 1848 Sky Blue Glacier called Baby Blue and a 1973 26'-3 # 1460 Parrot green Seqouia Known as the Big Green,
And sold my 1973 26'-2 # 581 White Canyon lands under the name Dobbelt trøbbel
in Norway
[Updated on: Thu, 30 January 2014 17:40] Report message to a moderator |
|
|
|
| Re: [GMCnet] Dimensions needed for GMC MH Model Kit Project [message #238149 is a reply to message #238117] |
Thu, 30 January 2014 17:32 |
Ken Henderson
Messages: 8726
Registered: March 2004
Location: Americus, GA
Karma: 9
|
Senior Member |
|
|
John,
Going strictly by my '76 Birchaven, it seems GMC made the sub-skin
structure as common as possible, so that only the skin required
modification for variations.
Two examples:
1. I wanted to lengthen the right side window. The task was greatly
simplified when I found that the shorter window common to Birchavens was
framed with an added upright -- the basic frame for the longer window
common to 26' coaches was in place. Only cutting sheet metal was necessary
to create the needed opening.
2. Mine is the only 23' coach I've seen with an access door like that on
the left side of most 26' coaches. And mine came from a 26' coach -- I
added it at the left rear. But when I cut the opening through the skin for
that door it was to utilize framework that was in place before the skin was
applied at the factory. In fact, no only was the opening framed, the
aluminum tab for the door latch had been welded in place. Someone planned
ahead -- apparently just for me. :-)
Ken H.
On Thu, Jan 30, 2014 at 2:56 PM, John Fleming wrote:
> ...
> bryant374 wrote
> > There were a number of changes/modifications throughout the six years of
> production. Some documented, some not, some known, some not so well.
> Thanks Bill. But I am aware of these issues. That's why I am here, to try
> and document and/or clarify as many as possible. Ugh! 8o
> ...
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Ken Henderson
Americus, GA
www.gmcwipersetc.com
Large Wiring Diagrams
76 X-Birchaven
76 X-Palm Beach
|
|
|
|
|
|
|
|
| Re: [GMCnet] Dimensions needed for GMC MH Model Kit Project [message #251128 is a reply to message #251125] |
Sat, 31 May 2014 20:09 |
k2gkk
Messages: 4452
Registered: November 2009
Karma: -8
|
Senior Member |
|
|
I would imagine the "dims" = dimensions (subject of the message).
~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
~~ ~ D C "Mac" Macdonald ~ ~~
~ ~ Amateur Radio - K2GKK ~ ~
~ ~ USAF and FAA, Retired ~ ~
~ ~ ~ Oklahoma City, OK ~ ~ ~
~~ ~ ~ "The Money Pit" ~ ~ ~~
~ ~ ~ ~ TZE166V101966 ~ ~ ~ ~
~ ~ ~ '76 ex-Palm Beach ~ ~ ~
~~ k2gkk + hotmail dot com ~~
~ www.gmcmhphotos.com/okclb ~
~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
______________
*[ ]~~~[][ ][|\
*--OO--[]---O-*
> Date: Sat, 31 May 2014 21:43:35 -0300
> From: kingsleygmc@gmail.com
> To: gmclist@temp.gmcnet.org
> Subject: Re: [GMCnet] Dimensions needed for GMC MH Model Kit Project
>
> Dims...??? what language are we speaking?
>
> Mike in NS
>
>
> On Sat, May 31, 2014 at 3:29 PM, John Fleming
> wrote:
>
>> It's been awhile. How is everyone doing?? Well I hope, and cruising around
>> in you GMCs. :d
>>
>>
>> So, now that Summer is here (in the northern hemisphere at least) anyone
>> got numbers for me?? 8o
>>
>>
>> http://coldnorth.com/johnnycrash/MMI/GMCMH/R&D/
>>
>> Hopefully my drawings make sense to others. Measurements can be in Inches
>> or mm. Thanks all, in advance.
>> --
>> John Fleming
>> http://www.coldnorth.com/johnnycrash/MMI/GMCMH
>> Building my own GMC Motorhome from scratch. Problem is, it's only 1/25.
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>>
>
>
>
> --
> Michael Beaton
> 1977 Kingsley 26-11
> 1977 Eleganza II 26-3
> Antigonish, NS
>
> * This is my second trip through the 60's; the first time the drugs were
> better !
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
| Re: [GMCnet] Dimensions needed for GMC MH Model Kit Project [message #251133 is a reply to message #251128] |
Sat, 31 May 2014 20:47 |
Kingsley Coach
Messages: 2691
Registered: March 2009
Location: Nova Scotia Canada
Karma: -34
|
Senior Member |
|
|
Ohhhhhhh....
Thanks Mac
On Sat, May 31, 2014 at 10:09 PM, D C _Mac_ Macdonald
wrote:
> I would imagine the "dims" = dimensions (subject of the message).
>
> ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
> ~~ ~ D C "Mac" Macdonald ~ ~~
> ~ ~ Amateur Radio - K2GKK ~ ~
> ~ ~ USAF and FAA, Retired ~ ~
> ~ ~ ~ Oklahoma City, OK ~ ~ ~
> ~~ ~ ~ "The Money Pit" ~ ~ ~~
> ~ ~ ~ ~ TZE166V101966 ~ ~ ~ ~
> ~ ~ ~ '76 ex-Palm Beach ~ ~ ~
> ~~ k2gkk + hotmail dot com ~~
> ~ www.gmcmhphotos.com/okclb ~
> ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
> ______________
> *[ ]~~~[][ ][|\
> *--OO--[]---O-*
>
>
>
>> Date: Sat, 31 May 2014 21:43:35 -0300
>> From: kingsleygmc@gmail.com
>> To: gmclist@temp.gmcnet.org
>> Subject: Re: [GMCnet] Dimensions needed for GMC MH Model Kit Project
>>
>> Dims...??? what language are we speaking?
>>
>> Mike in NS
>>
>>
>> On Sat, May 31, 2014 at 3:29 PM, John Fleming >
>> wrote:
>>
>>> It's been awhile. How is everyone doing?? Well I hope, and cruising
> around
>>> in you GMCs. :d
>>>
>>>
>>> So, now that Summer is here (in the northern hemisphere at least)
> anyone
>>> got numbers for me?? 8o
>>>
>>>
>>> http://coldnorth.com/johnnycrash/MMI/GMCMH/R&D/
>>>
>>> Hopefully my drawings make sense to others. Measurements can be in
> Inches
>>> or mm. Thanks all, in advance.
>>> --
>>> John Fleming
>>> http://www.coldnorth.com/johnnycrash/MMI/GMCMH
>>> Building my own GMC Motorhome from scratch. Problem is, it's only 1/25.
>>> _______________________________________________
>>> GMCnet mailing list
>>> Unsubscribe or Change List Options:
>>> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>>>
>>
>>
>>
>> --
>> Michael Beaton
>> 1977 Kingsley 26-11
>> 1977 Eleganza II 26-3
>> Antigonish, NS
>>
>> * This is my second trip through the 60's; the first time the drugs were
>> better !
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
--
Michael Beaton
1977 Kingsley 26-11
1977 Eleganza II 26-3
Antigonish, NS
* This is my second trip through the 60's; the first time the drugs were
better !
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
Goto Forum:
Current Time: Fri Nov 15 18:33:37 CST 2024
Total time taken to generate the page: 0.01753 seconds
|
GMCforum
Search
Help
Register
Login
Home
